stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: Bob Disharoon on March 03, 2007, 06:23:51 AM

Title: Leading edge material
Post by: Bob Disharoon on March 03, 2007, 06:23:51 AM

Im building a ringmaster..does anyone make preformed leading edges like the old kits used to provide..thnx in advance, BOB

Title: Re: Leading edge material
Post by: Bill Little on March 03, 2007, 06:35:38 AM

I have gotten some from the hobby shop.  I *think* they come from Sig.  IIRC, Lone Star also has/had them.

Title: Re: Leading edge material
Post by: Bob Disharoon on March 03, 2007, 05:20:56 PM

Thanx...found some on Sig..of course after I made them myself on the 1972 Dremel scroll saw from the bay... 95% of the way through this a screw ALMOST backed out and the motor was about to fly thru the wall..stopped it just in time...BOB

Title: Re: Leading edge material
Post by: Bill Little on March 03, 2007, 07:30:59 PM

Quote from: bob disharoon on March 03, 2007, 05:20:56 PM

Thanx...found some on Sig..of course after I made them myself on the 1972 Dremel scroll saw from the bay... 95% of the way through this a screw ALMOST backed out and the motor was about to fly thru the wall..stopped it just in time...BOB

GREAT SAVE! 

Title: Re: Leading edge material
Post by: Jim Thomerson on March 04, 2007, 06:37:18 AM

Here is a great opportunity for you to try a molded leading edge.  Where did I see the post on building Ringmasters with molded leading edges?