stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: Motorman on February 20, 2021, 07:48:16 PM

Title: Laser cut reversal
Post by: Motorman on February 20, 2021, 07:48:16 PM

blank

Title: Re: Laser cut reversal
Post by: Avaiojet on February 21, 2021, 04:04:21 AM

Quote from: Motorman on February 20, 2021, 07:48:16 PM

I've got an extra 1/4" balsa sheet that came in a kit that was an optional cheek cowl for electric. It's got 3 cheek cowls for a FTwister laser cut but never punched out. It's a nice piece of wood and every time I look at it I think of mixing epoxy and micro balloons and filling the gaps with a small syringe and using it for a stab/elevator that will also get fiberglassed. What do you think, crazy?


Motorman 8)

Yes crazy.  Needless added weight. Start with fresh wood.

Title: Re: Laser cut reversal
Post by: Larry Renger on February 24, 2021, 09:15:18 PM

Right up until you try to cut or sand a cross them. Then you will see how much stiffness they add! 👎

Title: Re: Laser cut reversal
Post by: Howard Rush on February 24, 2021, 10:36:07 PM

I like the stuff you come up with, Motorman.