stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: Mike Griffin on March 17, 2023, 01:56:18 PM
-
Before you glue your leading edge sheeting to the ribs and leading edge, cut some 1/16 x 1/4 balsa strips between the ribs to let the edge of the sheeting rest on and provide a better bond. This is very important when building a Millennium type wing. Here are some pictures to illustrate this. NOTE: This is NOT a Millennium type wing.
Mike
-
Tom Morris supplied these in all his kits, starting with the profile P51. Great idea and thanks for bringing it to the attention of builders. D>K
Ty,
That is who taught me to do it. I talked to Tom today and he sounded good but said he was fighting some health issues. I will not go into it on here but you are close enough to him to probably know. He is really a one of a kind man and gentleman.
Mike