stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: Bootlegger on May 04, 2012, 08:22:53 AM

Title: I'm a searchin'
Post by: Bootlegger on May 04, 2012, 08:22:53 AM

  Lookin' for a root templet of the full size flight streak rib's..
  Who can help?
  Thanks a lot,    y1

Title: Re: I'm a searchin'
Post by: Andrew Hathaway on May 04, 2012, 09:26:29 AM

Try this... Hopefully the size is still correct after converting to jpg and uploading, if not you'll probably have to adjust the size.

Title: Re: I'm a searchin'
Post by: Gene O'Keefe on May 05, 2012, 06:01:50 AM

I've got an unmolested Flite Streak kit stashed away....if no one else has an immediate copy, I'll dig it out and copy it for you.

Title: Re: I'm a searchin'
Post by: Bootlegger on May 05, 2012, 04:23:29 PM

  Guy's I should have said that I was looking to make some templets to cut a flight streak wing from foam.
The way those ribs in the kit were cut I couldn't use the stock ribs.

  I apologize for any confusion, and thank all y'all for the responses.
  Again, I apologize...

Title: Re: I'm a searchin'
Post by: bill bischoff on May 06, 2012, 10:18:59 AM

I sent you one by email.

Title: Re: I'm a searchin'
Post by: Joseph Patterson on May 09, 2012, 09:51:48 PM

       Gil,
           You can use the stock rib to make a template. TRACE the rib and use a french curve or a compass to make a full leading edge. I'm assuming you were referring to the leading edge when stating you could not use the stock root rib due to the way it is cut-out.
       Doug

Title: Re: I'm a searchin'
Post by: Bootlegger on May 15, 2012, 04:12:10 PM

   <=  Guy's I sure do appreciate all the help with the rib templets.
  Sparky again thanks for the best web site for Stunt... #^