Author Topic: I'm a searchin' (Read 909 times)

Bootlegger · « **on:** May 04, 2012, 08:22:53 AM »

Lookin' for a root templet of the full size flight streak rib's..
Who can help?
Thanks a lot,

Andrew Hathaway · « **Reply #1 on:** May 04, 2012, 09:26:29 AM »

Try this... Hopefully the size is still correct after converting to jpg and uploading, if not you'll probably have to adjust the size.

Gene O'Keefe · « **Reply #2 on:** May 05, 2012, 06:01:50 AM »

I've got an unmolested Flite Streak kit stashed away....if no one else has an immediate copy, I'll dig it out and copy it for you.

Bootlegger · « **Reply #3 on:** May 05, 2012, 04:23:29 PM »

Guy's I should have said that I was looking to make some templets to cut a flight streak wing from foam.
The way those ribs in the kit were cut I couldn't use the stock ribs.

I apologize for any confusion, and thank all y'all for the responses.
Again, I apologize...

bill bischoff · « **Reply #4 on:** May 06, 2012, 10:18:59 AM »

I sent you one by email.

Joseph Patterson · « **Reply #5 on:** May 09, 2012, 09:51:48 PM »

Gil,
You can use the stock rib to make a template. TRACE the rib and use a french curve or a compass to make a full leading edge. I'm assuming you were referring to the leading edge when stating you could not use the stock root rib due to the way it is cut-out.
Doug

Bootlegger · « **Reply #6 on:** May 15, 2012, 04:12:10 PM »

Guy's I sure do appreciate all the help with the rib templets.
Sparky again thanks for the best web site for Stunt...

Author Topic: I'm a searchin' (Read 909 times)

Bootlegger

I'm a searchin'

Andrew Hathaway

Re: I'm a searchin'

Gene O'Keefe

Re: I'm a searchin'

Bootlegger

Re: I'm a searchin'

bill bischoff

Re: I'm a searchin'

Joseph Patterson

Re: I'm a searchin'

Bootlegger

Re: I'm a searchin'