News:



  • April 17, 2024, 08:41:44 PM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: How do you waterproof a balsa leading edge mold?  (Read 737 times)

Offline Matt Curtis

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 62
How do you waterproof a balsa leading edge mold?
« on: November 20, 2022, 05:33:43 PM »
So i have made a leading edge mold for s1 ringmaster out of balsa.  Could i just put a few coats of minwax polyaccrylic on it and sand smooth to make it waterproof or could i just cover it with monokote?
Logged

Online Dan McEntee

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 6855
Re: How do you waterproof a balsa leading edge mold?
« Reply #1 on: November 20, 2022, 06:26:55 PM »
 What is the mold made from? Of it is carved from any kind of wood, the polyacrylic would do the job. Any kind of wood sealer product, lacquer, even dope. After what ever you put on it sits and cures for a few days. Give it a good coat of wax also to help keep things from sticking, and it will also help repel water also.
  Type at you later,
  Dan McEntee
   
Logged
AMA 28784
EAA  1038824
AMA 480405 (American Motorcyclist Association)

Offline Matt Curtis

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 62
Re: How do you waterproof a balsa leading edge mold?
« Reply #2 on: November 20, 2022, 06:42:50 PM »
Mold is balsa.  Thank you for the tip i thought poly would work so i will do that.  I have carnuba wax that i can put on it when i am ready to use it.  I am excited to do this to build a light ringmaster.  Will see how it goes?
Logged

Offline Alan Buck

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 304
Re: How do you waterproof a balsa leading edge mold?
« Reply #3 on: November 20, 2022, 07:24:29 PM »
Matt i would go with z/epoxy no wax do to adhesion problems
Logged
ALAN E BUCK

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22769
Re: How do you waterproof a balsa leading edge mold?
« Reply #4 on: November 20, 2022, 08:07:52 PM »
I wrapped my molds with saran wrap.  Really I didn't water proof them. D>K
Logged
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Online Brett Buck

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 13732
Re: How do you waterproof a balsa leading edge mold?
« Reply #5 on: November 21, 2022, 07:46:24 PM »
Quote from: Matt Curtis on November 20, 2022, 05:33:43 PM
So i have made a leading edge mold for s1 ringmaster out of balsa.  Could i just put a few coats of minwax polyaccrylic on it and sand smooth to make it waterproof or could i just cover it with monokote?

    Almost anything would be OK. I have rather intense dislike for polycrylic and water-based woodworking finishes. But it would be fine if that is what you have.

       Brett
Logged

Online Howard Rush

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7811
Re: How do you waterproof a balsa leading edge mold?
« Reply #6 on: November 23, 2022, 04:28:23 PM »
I hesitate to buck Alan and Brett on mold buck waterproofing, but I use Saran Wrap.   I’m not that concerned about the grain imprinting on the balsa.
Logged
The Jive Combat Team
Making combat and stunt great again

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here