stunthanger.com

Building Tips and technical articles. => Building techniques => Topic started by: Jim Oliver on November 21, 2006, 03:52:41 PM

Title: Finishing help needed
Post by: Jim Oliver on November 21, 2006, 03:52:41 PM

Hi Guys,

This has probably been answered many times before----but I wasn't paying attention.

I have covered a Cardinal profile fuse with light glass cloth/epoxy resin and have sanded it well.  It's nice and smooth and only picked up 3/8 oz.

Now--what do I do next?  Some sort of primer, if so what?

HELP!!!
 
Thanks,
Jim

Title: Re: Finishing help needed
Post by: RC Storick on November 21, 2006, 03:59:22 PM

Yes use Automotive type lacquer primer. Spray can.