stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: big ron on December 13, 2017, 02:02:33 PM
-
Has any of you used EZ Lam epoxy from ACP for laminating ply doublers to balsa fuse sides?
-
Yes.... Very similar to ZAPPs Z-Poxy...
I use it mostly for CF outside of fuselage fixing -----but the working time and thin layer used for doublet and tripplers is easier for me than 30 or 90 min Hobby epoxy....where I might us the Z-Poxy or the EZ _Lam
Also takes Zink Sterate and Micro Baloons well
-
So you are using the EZ LAM to apply CF veil also