Author Topic: probably not the first to try but it worked for me (Read 733 times)

Russ Danneman · « **on:** January 05, 2011, 05:16:42 PM »

a recently built (not covered)wing had slight warp in it. the cussing did not help, so i got out MY "as seen on tv" SHARK FLOOR STEAMER and steamed it right out!

rd

note:yes, i did say" my shark" ,the wife has no idea you can use one of those things on wood floors.

Bill Little · « **Reply #1 on:** January 05, 2011, 06:29:10 PM »

Good thinking!

Randy Ryan · « **Reply #2 on:** January 05, 2011, 07:52:04 PM »

I've actually soaked entire wings in the bathtub and straightened them out, then I learned how to build them flat!!! HeHe, nothing personal.

Russell Shaffer · « **Reply #3 on:** January 05, 2011, 09:05:48 PM »

I have used a steam cleaner "as seen on TV" to mold LE's and take out wing warps. My father in law gave it to me to clean things, but I've found a better use.

Will Hinton · « **Reply #4 on:** January 06, 2011, 02:12:45 PM »

Modelers and luthiers are the worlds' cleverest people!

Ward Van Duzer · « **Reply #5 on:** January 14, 2011, 11:37:56 AM »

Then how come modelers don't use luthiers white glue? I posted that 3 times and folks are still asking "what kind of white glue should I use?"

W.

Author Topic: probably not the first to try but it worked for me (Read 733 times)

Russ Danneman

probably not the first to try but it worked for me

Bill Little

Re: probably not the first to try but it worked for me

Randy Ryan

Re: probably not the first to try but it worked for me

Russell Shaffer

Re: probably not the first to try but it worked for me

Will Hinton

Re: probably not the first to try but it worked for me

Ward Van Duzer

Re: probably not the first to try but it worked for me