Author Topic: building table (Read 2789 times)

Jim Morris · « **on:** July 23, 2011, 03:25:32 PM »

Hello all, I am returning to this great sport, and was hoping some people can give me some ideas on building a "building table" I just purchased a hollow door today,but it warped in the sun. I have used them before,but I am very unhappy right now and think I will try another method. Hopefully something that doesnt cost a small fortune. Any ideas would be helpful. Thanks, Jim

Leester · « **Reply #1 on:** July 24, 2011, 07:36:36 AM »

I have several but this one my daughter-in-law picked up for me at a secound hand store. They are usually pretty flat and I just added MDF board and dry wall plus I have 1/4" glass top for it. I would have gotten thicker glass but mucho $$$$ unless you stumble across a bargain.

Jim Morris · « **Reply #2 on:** July 24, 2011, 07:08:17 PM »

Thanks guys, I took the hollow door back today and got a solid door,(very heavy) put it over 1in thick foam insulation and shimmed the underside to flat, seems to be good. I will get back into the game with a Fancherized twister.Hopefully I will be able to regain what I lost in a short period.

Brett Buck · « **Reply #3 on:** July 24, 2011, 08:59:36 PM »

Quote from: Ty Marcucci on July 23, 2011, 08:18:41 PM

Guillow sells them, but you have to look in one of their kits for the papers.

I think you can find them without having to buy the kit:

http://www.guillow.com/48workboard.aspx

Brett

Dwayne · « **Reply #4 on:** July 26, 2011, 05:19:52 PM »

I use a solid door as well with a sheet of drywall on top.

larry borden · « **Reply #5 on:** July 26, 2011, 07:37:24 PM »

I've been using the boards that Tower has, which looks a lot like the Guillow's one. I also bought a roll of the clear plastic they offer as plan protector. Has worked very well for me.

dave siegler · « **Reply #6 on:** July 26, 2011, 07:53:44 PM »

You can get this at your local home depot / menards.
http://www.homasote.com/TypesOfUsers/Homeowners.aspx

I have it screwed to a sheet of veineer coated MDF wiht some stringers below that works well. Takes pins well.

John Tomlin · « **Reply #7 on:** July 27, 2011, 07:13:53 AM »

I recently bit the bullet and purchased a solid door and skinned it with metal to use magnets. Till then I used a hollow door with ceiling tiles and glass (depending on what I was doing). Haven't looked back. Love the metal top with magnets. Really makes building simpler since the magnets act as the third and fourth hands.

John

Mike Mulligan · « **Reply #8 on:** September 28, 2011, 10:57:43 PM »

I really like the metal top and magnet idea John! I bit the bullet too a few years ago. I got a 7'6" by 44" solid core door with a half inch thick tempered glass top (It helps to have a good buddy who is in the window and door business!). Kind of big, I guess, but it is nice to have room for two projects at once and still have room for

!

I love being able to glue jigs and fixtures to the glass top. Cleans up nicely, seems to brighten up the room and the new ship looks great reflected in the glass!

Besides, now that I have a dedicated bench, I no longer build wings on the glass coffee table. (Significantly cuts down on

)

Cheers,

Mike

Leester · « **Reply #9 on:** October 09, 2011, 06:59:13 PM »

You built on the coffee table

It's a miracle your still breathing

Author Topic: building table (Read 2789 times)

Jim Morris

building table

Leester

Re: building table

Jim Morris

Re: building table

Brett Buck

Re: building table

Dwayne

Re: building table

larry borden

Re: building table

dave siegler

Re: building table

John Tomlin

Re: building table

Mike Mulligan

Re: building table

Leester

Re: building table