News:



  • June 20, 2025, 06:30:21 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Attaching flap/elev. horns ...Need lessons  (Read 1720 times)

Offline Rob Killick

  • 2013 Supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 388
Attaching flap/elev. horns ...Need lessons
« on: November 30, 2009, 09:36:59 PM »
Hi ,

Okay , here goes ...

Are flaps epoxied to the flap horns , or can they be left as is and slid onto the flap horn ?

I can see when using "Lucky boxes" ,  epoxy should not be used . What if I use bass wood "clips" ?

I guess my second question should be ...

If I'm going to insert the wire flap horn to a plain balsa flap should I epoxy , or not ?

Thanks ,

Rob Killick
« Last Edit: December 01, 2009, 02:40:30 PM by Rob Killick »
Logged
Rob Killick , MAAC 33300

Offline Bob Reeves

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3414
    • Somethin'Xtra Inc.
Re: Attaching flap/elev. horns ...Need lessons
« Reply #1 on: December 01, 2009, 01:25:14 PM »
As you stated, epoxy everything except lucky boxes.. I have epoxied horns directly into balsa flaps on several ships without issues.
Logged

Offline Rob Killick

  • 2013 Supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 388
Re: Attaching flap/elev. horns ...Need lessons
« Reply #2 on: December 01, 2009, 02:42:02 PM »
Hi Bob ,

Thanks for the help .

I appreciate your time and help  y1

All the best ,

Rob Killick
Logged
Rob Killick , MAAC 33300

Offline Dick Pacini

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1649
Re: Attaching flap/elev. horns ...Need lessons
« Reply #3 on: December 01, 2009, 03:43:05 PM »
I have been away too long.  What is a lucky box? HB~>
Logged
AMA 62221

Once, twice, three times a lady.  Four times and she does it for a living.  "You want me on that wall.  You need me on that wall."

Offline Bob Reeves

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3414
    • Somethin'Xtra Inc.
Re: Attaching flap/elev. horns ...Need lessons
« Reply #4 on: December 01, 2009, 04:14:33 PM »
A plywood box that just fits the control horn wire. It allows the wire to move sideways for tapered, dihedral or swept wings. Can't remember how it got it's name.. I used lucky boxes on both the flaps and elevators of the FJ-4 carrier airplane I'm building. The wing is both swept and has dihedral, the elevators are swept.

http://stunthanger.com/smf/index.php?topic=14390.0
Logged

Offline Ralph Wenzel (d)

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 845
Re: Attaching flap/elev. horns ...Need lessons
« Reply #5 on: December 01, 2009, 05:14:42 PM »
"Lucky Box" got it's name from Royal "Lucky" Pyatt, the developer. RSM includes Lucky Boxes with many of their excellent kits.

Logged
(Too many irons; not enough fire)

Ralph Wenzel
AMA 495785 League City, TX

Offline Don Hutchinson AMA5402

  • 2014 Supporters
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 721
Re: Attaching flap/elev. horns ...Need lessons
« Reply #6 on: December 01, 2009, 06:07:55 PM »
If you use 3/32 horns, 1/8x1/4 square brass tubing works great for Lucky boxes.
Don
Logged

Offline Ward Van Duzer

  • 2015
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1283
Re: Attaching flap/elev. horns ...Need lessons
« Reply #7 on: December 19, 2009, 12:01:38 PM »
After drilling the horn wire hole pin prick the areas above and below the tunnell. Then wick thin CA into the hole and the outside pinpricks. Sand and fill, or cover with cloth hinges. Open up with a hand drill if needed. Has worked as good or better for me than plywood sandwiches when "tweaking". And it's invisable! On straight trailing edges, epoxy the horn wire.

W.
Logged
I hate spelling errors, you mess up 2 letters and you are urined!

Don't hesitate to ask dumb questions.
They are easier to handle than dumb mistakes!  Ward-O AMA 6022

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: