stunthanger.com
Building Tips and technical articles. => Building techniques => Topic started by: Gordon Tarbell on May 31, 2008, 10:53:48 PM
-
Looking for sources to obtain 1/64 ply sheets. Would like to find it in larger sheets (4'x8') the stuff in the hobby shop is too $ . I think it was midwest ($ 44.95 for a 24"x48"
-
I just checked the Sig web site; 1/64x24x48 inches @ $44.99.
A little pricey........
Cheers,
Jim
-
Aircraft Spruce is THE place to get this stuff, especially with the demise of Lone Star. See:
http://www.aircraftspruce.com/catalog/wppages/finnishbirch.php
Really nice folks to deal with, too . . . .
-
National Balsa shows 12 X 48 at 11.83 I didn't see what ply it was rated at.
-
National Balsa shows 12 X 48 at 11.83 I didn't see what ply it was rated at.
Typically the 1/64 ply I have used is three ply. I have never seen more than three ply but I live a sheltered life!
Robert
-
Leester that sounds good, I will contact them on monday. Thanks