News:



  • December 26, 2024, 04:07:27 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Vector spinner  (Read 3812 times)

Bombat

  • Guest
  • Trade Count: (0)
Vector spinner
« on: April 01, 2007, 11:23:56 AM »
The ARC Vector calls for a 1.75 spinner : two questions : I would like to use an ali two blade type on a Brodak 40 but the tru spin I have is only suitable for up to 9x6 props (according to their website)
Any suggestions for something suitable?
Also, what is the shaft thread for the Brodak 40?
Thanks
Logged

Offline Leester

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2529
Re: Vector spinner
« Reply #1 on: April 01, 2007, 11:41:10 AM »
Check with Randy Smith on the spinner. The Brodak 40 thread's are 1/4-28
Logged
Leester
ama 830538

Offline Jim Oliver

  • 25 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1412
Re: Vector spinner
« Reply #2 on: April 01, 2007, 11:49:32 AM »
Tru-turn will custom cut a spinner to fit the prop of your choice if you order it directly from them.  I expect there may be a slight additional charge.  My experience with Tru-Turn spinners on RC models is that while the spinners are high quality, they are not particularly light.  They do have a light back plate (several cut-outs) option for their larger spinners.

Randy may be able to supply custom fit spinners also; he does nearly everything!!  Randy's spinners would probably be lighter than the standard Tru-Turn.

Cheers,
Jim
Logged
Jim Oliver
AMA 18475

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12669
  • Second in COMMAND
Re: Vector spinner
« Reply #3 on: April 01, 2007, 01:31:19 PM »
Quote from: Bombat on April 01, 2007, 11:23:56 AM
The ARC Vector calls for a 1.75 spinner : two questions : I would like to use an ali two blade type on a Brodak 40 but the tru spin I have is only suitable for up to 9x6 props (according to their website)
Any suggestions for something suitable?
Also, what is the shaft thread for the Brodak 40?
Thanks

I suspect you *might* have to cut the notches to fit your prop.  I have no clue as to why they would NOT be "suitable", otherwise, for a bigger prop.  I have used 1.75 spinners on .40s and .51s before after grinding the cut outs to fit.
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline Bob Reeves

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3414
    • Somethin'Xtra Inc.
Re: Vector spinner
« Reply #4 on: April 02, 2007, 06:53:13 AM »
Brodak carries a nice light aluminum spinner that will fit...
Logged

Bombat

  • Guest
  • Trade Count: (0)
Re: Vector spinner
« Reply #5 on: April 02, 2007, 07:45:23 AM »
Thanks for the suggestions all . Bill, Tru Turn don't advise modifying their product so I thought I best see if there was something in standard form
Cheers
Logged

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12669
  • Second in COMMAND
Re: Vector spinner
« Reply #6 on: April 02, 2007, 09:39:18 AM »
Quote from: Bombat on April 02, 2007, 07:45:23 AM
Thanks for the suggestions all . Bill, Tru Turn don't advise modifying their product so I thought I best see if there was something in standard form
Cheers

I see.  I wouldn't tell anyone to go against the Manu. directions, but in MY case, I have had to file/grind Tru Turns, and about every other spinner there is, at one time or another for props to fit.  I haven't experienced any failures or problems.  Again, that is just my experiences.  Spinner cutouts never do fit all props......  (Please, don't take this as critcism, it isn't)
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Bombat

  • Guest
  • Trade Count: (0)
Re: Vector spinner
« Reply #7 on: April 02, 2007, 11:59:33 AM »
Bill, that's useful to know : I may well try to carefully ease the spinner to fit

Cheers
Logged

Offline peabody

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2867
Re: Vector spinner
« Reply #8 on: April 02, 2007, 07:59:13 PM »
Essential, when carving the notches in spinners, is that the prop blade does not touch the spinner....otherwise the blade is liable to be severed....
Logged

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12669
  • Second in COMMAND
Re: Vector spinner
« Reply #9 on: April 02, 2007, 09:34:35 PM »
Quote from: peabody on April 02, 2007, 07:59:13 PM
Essential, when carving the notches in spinners, is that the prop blade does not touch the spinner....otherwise the blade is liable to be severed....

Excellent point Rich!  I'm very glad you pointed that out. y1
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline Gary Anderson

  • AMA Member and supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 729
Re: Vector spinner
« Reply #10 on: April 04, 2007, 12:20:03 AM »
Don't know why you couldn't make a spinner fit. Used to make your own cut outs on spinners. A lot of them just came notched and you make the final fit?
Logged
Gary Anderson

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12669
  • Second in COMMAND
Re: Vector spinner
« Reply #11 on: April 04, 2007, 12:25:53 AM »
Quote from: Gary Anderson on April 04, 2007, 12:20:03 AM
Don't know why you couldn't make a spinner fit. Used to make your own cut outs on spinners. A lot of them just came notched and you make the final fit?

Hi Gary,

Actually my old "spun" Froom (Veco forerunner, you know) spinners had no slots, notches or anything for the props! ;D  You had to do it all!  LL~

Bill <><
Logged
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags: