News:



  • April 27, 2024, 01:42:50 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: Vector ARC/ARF  (Read 1263 times)

Offline Geoff Goodworth

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 808
Vector ARC/ARF
« on: August 21, 2011, 12:27:03 AM »
I pulled the bellcrank out of my ARC Vector without noting how the screw was retained. I have the screw, two nuts, a plain washer and a spring washer.

Can anybody tell me which order they go back in?

Also, should I put the bellcrank back where it was (down line in front) or reverse it?
Logged

Offline john e. holliday

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 22773
Re: Vector ARC/ARF
« Reply #1 on: August 21, 2011, 01:19:09 PM »
If you have the ARC version, go get a new bolt long enought to go clear thru the wing top and bottom.   Install spacers to center the bellcrank in the wing.   Install ply pads over the bolt top and bottom.  Use epoxy for the pads.   You could use a steel rod and cut groves/notches top and bottom for the epoxy to hold it in place. 
Logged
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here