News:


  • March 28, 2024, 04:53:56 AM

Login with username, password and session length

Author Topic: SV11 engine?  (Read 13329 times)

Offline Peter Nevai

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 975
    • C3EL
SV11 engine?
« on: August 19, 2010, 05:34:25 PM »
Ok, anyone have a suggestion on a power plant for the sv11 arc? I have been procrastinating about getting back into this but the sv11 was calling my name. I was thinking a 51 or there about. While I can afford a PA, I just can't see spending $400 on a engine for a $200 arc. I do want something stone cold reliable and proven. Seeing that Rojett cast engines are no longer produced, I guess a reworked NIB engine from a major manufacturer is the way to go?
Words Spoken by the first human to set foot on Mars... "Now What?"

Offline Peter Nevai

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 975
    • C3EL
Re: SV11 engine?
« Reply #1 on: August 19, 2010, 08:02:38 PM »
Chirp, chirp, chirp, ribbit, ribbit, chirp, hoot, chirp, chirp, chirp.
Words Spoken by the first human to set foot on Mars... "Now What?"

Offline Jim Oliver

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1407
Re: SV11 engine?
« Reply #2 on: August 19, 2010, 08:46:41 PM »
Peter,

I spoke to Randy today about an engine for the SV 11; when he finds your question, he will probably post the real answer.  Until then, it is a full size model and will probably weigh in the low to mid 60 oz. range.  A PA 51/pipe set up will work, but I plan a PA 61 or 65 for mine.

The Enya 60 rear exhaust CL stunt engine & pipe would be a lower cost alternate.

Cheers,

Jim
Jim Oliver
AMA 18475

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: SV11 engine?
« Reply #3 on: August 19, 2010, 09:25:14 PM »
Ok, anyone have a suggestion on a power plant for the sv11 arc? I have been procrastinating about getting back into this but the sv11 was calling my name. I was thinking a 51 or there about. While I can afford a PA, I just can't see spending $400 on a engine for a $200 arc. I do want something stone cold reliable and proven. Seeing that Rojett cast engines are no longer produced, I guess a reworked NIB engine from a major manufacturer is the way to go?


PA 40
PA 51
PA 61
PA65
PA75
ST 60
Enya 61 SE
Enya 61 RE
ST 51
there are more these are a few

Offline Peter Nevai

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 975
    • C3EL
Re: SV11 engine?
« Reply #4 on: August 20, 2010, 08:04:34 PM »
All righty then, Seeing that this will be my only engine and plane. I guess I'll spring for a PA 51. I don't want to into the 60 range as I already have a old OS 60 gold head NIB, for a plane that needs a 60. So if a PA 51 will work well in the SV 11 then I'll stick with that. Since that will bring the total for the motor and plane combo up to nearly $600.00 it will have to wait about 60 days as I just had to spend a bundle getting the wife's car fixed. ( $1,500). The discretionary budget is right around $500 per month. I'll post further questions about the engine on the engines forum. Thanks Randy. 
Words Spoken by the first human to set foot on Mars... "Now What?"

Willis Swindell

  • Guest
  • Trade Count: (0)
Re: SV11 engine?
« Reply #5 on: August 21, 2010, 07:59:22 AM »
Don’t forget the K&B 61 $100.
Willis

Dave Adamisin

  • Guest
  • Trade Count: (0)
Re: SV11 engine?
« Reply #6 on: August 21, 2010, 09:54:30 AM »
The Evolution 60 will also be out soon.....

Offline Will Davis

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1261
Re: SV11 engine?
« Reply #7 on: August 22, 2010, 07:07:26 PM »
Anyone tried to put a ST60 in one .. very tight fit between the mounts,,

Will
Will Davis
"Carolina Gang"

Offline bob branch

  • AMA Member
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 941
Re: SV11 engine?
« Reply #8 on: August 22, 2010, 07:17:57 PM »
Axi 2826/12
Arrowind 2832/05

Both on 4S with 12X6EP apc props will be excellent.

bob branch


Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12676
  • Second in COMMAND
Re: SV11 engine?
« Reply #9 on: August 22, 2010, 07:46:52 PM »
Anyone tried to put a ST60 in one .. very tight fit between the mounts,,

Will

Hi William,

The original SV-11 was flown by Bill Rich with the ST 60.  Is the ARF/ARC different?

Bill
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: SV11 engine?
« Reply #10 on: August 22, 2010, 08:30:59 PM »
The SV-11  ARF  is  NOT setup to drop in a  ST 60, if you want to use that engine you will just need to open up the motor mounts

Randy

Offline Will Davis

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1261
Re: SV11 engine?
« Reply #11 on: August 25, 2010, 02:25:33 PM »
Looks like a 6.5 ounce metal tank will be about the limit on fuel without major mods or custom tank . Brodak All vents forward tank looks good  . To put in a ST 60 you will need to remove a small amount of motor mount material to clear crankcase, Alum pads will be needed too, these will need to be relieved to clear engine  . Pretty iffy , But I will post pictures when I get installed . Kit is very well designed to accomidate these changes,, Great job  by Randy Smith and John Brodak on the ARF .

Will
« Last Edit: August 25, 2010, 03:17:55 PM by William Davis »
Will Davis
"Carolina Gang"

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: SV11 engine?
« Reply #12 on: August 25, 2010, 03:11:45 PM »
"To put in a ST 60 you will need to remove some motor mount material to clear crankcase,""

As I had stated it was NOT setup to be a dropin fit for motor that was discontinued over a decade ago, The mounts are wide and closer together for a reason,
You can always open the mounts up, you cannot  close them down to take a less wide case engine.

It is very easy to use a carbide flat bar sander, rasp, or bar sander to cut an angle on the side of the MM to have them fit a ST 60 or wider motor.
DO This  BEFORE  you glue the top block piece on to the plane, it is a simple Job.
Also we have never used anything bigger than a 6.5 inch long tank in any SV-11, stock 1 inch thick is 6.5 ounces and I have 7.5 and 8 ounce metal Uni tanks that wil fit if needed.
We always used Magnum uniflows in the SVs

Randy

Offline Norvaldo

  • 2020 supporter
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 121
Re: SV11 engine?
« Reply #13 on: August 30, 2010, 02:48:16 PM »
Mine weights  in at exactly 60 oz. with a Stalker .66 RE. (Engine is ca. 12.5 oz with muffler).
Just a slight trimming of motor mounts needed. Balance was right on with no extra weights needed.
Needed to add 10 mm to the nose ring due to the lenght of the engine. 
I use the variable motor mount (Windy/Brodak). Also put on 2 1/4 " wheels.
Flyes very well.
Norvald
Norvald Olsvold

Offline Randy Cuberly

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3674
Re: SV11 engine?
« Reply #14 on: September 02, 2010, 10:26:46 PM »
One of Randy S's recommendations is the Enya 61CXS (available in rear or side exhaust).
If you don't want to spring for the full boat PA with pipe etc. I would strongly recommend going with the Enya side exhaust engine.
An excellent running engine and made like a jewel.  It will fit in the SV with very little mount material removal (I know I've tried it on mine).
The Enya is a much smoother running than the old ST60 and I think the ARF will live a much happier and longer life with it than the Paint shaker.
If you do decide to use the ST definitely add some stiffening to the nose section of the Fuselage.
Mine is actually sitting with a RO Jett 65 in it on a pipe because I have two and really want to use them.
I used a PA51 for many years and lots of flights and definitely would not discourage that choice, but the Enya would be an excellent and Cheaper close 2nd best in my opinion.
I'm currently recovering from surgery and a post op infection so I haven't flown the SV yet but it is a great airplane.  I built two from plans in the past and they both flew very well.  One had a Randy S. OS46VF and the other a PA51.  Both setups worked very well.

Randy Cuberly
Randy Cuberly
Tucson, AZ

Offline Richard Oliver

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 96
    • RO-Jett Engines
Re: SV11 engine?
« Reply #15 on: September 06, 2010, 07:06:42 PM »
I am not sure where you got the info but we are still producing the cast case engines. In fact we have a new lite cast case 61 that Windy flew at VSC this year.
Richard Oliver

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: SV11 engine?
« Reply #16 on: September 07, 2010, 12:44:31 PM »
Hi

People have been very pleased with the New SV-11 ARF and ARC, however there has been a control horn issue with them, some of the horns have brazing that does not go all the way around the wire, This needs to be checked, and if found replaced ..before... you put them together. WE have more horns coming in now, as this problem has just been found

The kit has very nice CF pushrods, ball links and phenolic bellcranks with a good mount system. The hinges are good, and so is the other hardware. The other issue is the cowl mount, it works well for RE motors, but if you run a SE motor you will need to move 1 of the mounts

Randy

 

Offline Per Vassbotn

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 1
Re: SV11 engine?
« Reply #17 on: October 06, 2010, 01:04:14 PM »
Hello!

I have an original SV-11 and I'm using a Stalker .61 . The weight of the model is 1650 grams. Propeller 13x5.5

I'm planning to order an ARF SV-11 from Brodak and for this model I will use a Stalker .66

Per Vassbotn
Norway


Offline Neil Rogers

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 51
Re: SV11 engine?
« Reply #18 on: October 11, 2010, 09:41:38 PM »
I am flying my SV11 ARF with a piped PA 65.  I think I would be hard pressed to find a better engine for it.  I used a Sullivan 8 oz rectangular tank.  The engine only needs about 6 oz to get through the pattern, but I went with the Sullivan tank because it was readily available and easy to fit.  Plus, it works well.

I set up my engine and run it exactly the way Randy says to do it.  Generally starts on the first flip and delivers a perfect stunt run.

Thanks Randy for a great airplane and a superb power plant.

Neil Rogers
Edmonton

Offline Will Davis

  • 2016 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1261
Re: SV11 engine?
« Reply #19 on: January 10, 2011, 11:41:24 AM »
SV 11 is finished, ready for KOI , Changed the shape of Rudder only, painted canopy ,  Tom Lay ST 60 .  6.5 ounce tank, Glassed the fuselage  to keep things solid,  David Pearson '71 Mercury Purolator Special theme. 
« Last Edit: January 10, 2011, 01:04:10 PM by William Davis »
Will Davis
"Carolina Gang"

Offline Steve Fitton

  • 24 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2272
Re: SV11 engine?
« Reply #20 on: January 10, 2011, 06:34:04 PM »
SV 11 is finished, ready for KOI , Changed the shape of Rudder only, painted canopy ,  Tom Lay ST 60 .  6.5 ounce tank, Glassed the fuselage  to keep things solid,  David Pearson '71 Mercury Purolator Special theme. 

That looks awesome William!!!  Can't wait to see it!
Steve

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12676
  • Second in COMMAND
Re: SV11 engine?
« Reply #21 on: January 10, 2011, 07:47:49 PM »
Looks great William!

Good luck with it.

(of course the Wood Bros./Pearson '71-'73 Cyclone used a true Candy Red paint job on the roof! ;D )

Bill
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline Bootlegger

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2710
Re: SV11 engine?
« Reply #22 on: January 11, 2011, 04:36:54 AM »
......   David Pearson, now there is a name that I haven't heard in quite a while !!  That man could drive!!! #^
8th Air Force Veteran
Gil Causey
AMA# 6964

Offline Target

  • C/L Addict
  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1692
Re: SV11 engine?
« Reply #23 on: September 25, 2017, 04:21:51 PM »
Here is a thread revivement....
I'm planning on using the OS .46AXll in the SV-11 that is coming this way soon. I hope the cg and fit, as well as the proper run, works out for this engine and plane.
I will report back my findings.
R,
Target
« Last Edit: October 07, 2017, 03:49:21 PM by Target »
Regards,
Chris
AMA 5956

Offline B Norton

  • B-NO
  • 2019 supporter
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 111
Re: SV11 engine?
« Reply #24 on: October 07, 2017, 03:36:27 PM »
you could use the magnum 52 (blue head) I'm flying a full size legacy with one and it does it with authority. Randy sells them ready to fly.

Offline Target

  • C/L Addict
  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1692
Re: SV11 engine?
« Reply #25 on: October 07, 2017, 04:52:21 PM »
So, do you guys think that the OS.46AXII will be short on power for this plane? I keep hearing .5X-.60 sized engines being mentioned.... But I am under the impression that the newer engines, if operated at higher revs with lower pitched props, will far surpass the 4-2-4 engines (ST.51 for example) of yesteryear.
I assume that the newer engines (Schnurle), even if operated to give a 4-2-4, will STILL give more power than the older engines.

From all I can read, it should be plenty of power if the venturi is sized appropriately, but I'm no expert.

One reason I DID select this engine though, is that the OS.55AXII should be a "drop in" replacement to give a few more cubes displacement if more power is needed, with very little, if any, weight gain. Mounting holes should be identical.

R,
Target
Regards,
Chris
AMA 5956

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: SV11 engine?
« Reply #26 on: October 16, 2017, 05:34:36 PM »
The modern  Loop Charged  46  51   51   53  will  pull the  SV-11  very well,  ALL of these have more power than an  Older  St 60

Randy

Offline Manuel Cortes

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 276
Re: SV11 engine?
« Reply #27 on: November 06, 2017, 02:00:45 PM »
Merco 61.....better if Dixon tuned.

Sorry........Devil came to me...... lover of the British Bulldog and the good Tom.

Kind regards from Spain.

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: SV11 engine?
« Reply #28 on: November 06, 2017, 07:49:11 PM »
another excellent motor  to use for these  size planes  that fit well into an ARF  is  the  Magnum Blue Head  52  I can supply these  setup and ready to go, smaller footprint that a  ST  OS   Merco or K&B 61   but more power than all of them

Randy

Offline Jim Carter

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 953
Re: SV11 engine?
« Reply #29 on: November 07, 2017, 11:28:41 AM »
 LL~ LL~  Fox .35  with a tuned pipe!!  LL~ LL~

Offline Manuel Cortes

  • Trade Count: (0)
  • Commander
  • ****
  • Posts: 276
Re: SV11 engine?
« Reply #30 on: November 07, 2017, 12:34:15 PM »
 mw~ mw~ mw~ LL~ LL~ LL~ LL~ LL~ Your devil is even hotter tan mine!!!!!!!!! >:D >:D

Offline Fredvon4

  • 23 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2099
  • Central Texas
Re: SV11 engine?
« Reply #31 on: November 07, 2017, 01:02:26 PM »
Jim you are evil...grin

I got talked out of a stalker and into a Randy Smith Magnum 52 for my SOMEDAY SV 11
Randy's price was good, the engine came, I had to run on the bench... it primed, it bumped, and it started first back flip

I had a BSEG, ran out a tank of fuel, purged, ARO and set aside for the SOMEDAY SV-11
"A good scare teaches more than good advice"

Fred von Gortler IV

Offline Target

  • C/L Addict
  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1692
Re: SV11 engine?
« Reply #32 on: November 07, 2017, 04:53:46 PM »
Someday soon i hope. I'm gonna get scott dinger to make me a tube muffler for the .46ax-ll that I plan to put into my ANYDAYNOW SV-11....
« Last Edit: November 21, 2017, 04:42:38 PM by Target »
Regards,
Chris
AMA 5956

Offline Target

  • C/L Addict
  • 2019 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1692
Re: SV11 engine?
« Reply #33 on: November 21, 2017, 04:44:23 PM »
Engine is here, and standing by.
Regards,
Chris
AMA 5956

Offline RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 13747
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: SV11 engine?
« Reply #34 on: December 13, 2017, 12:57:31 AM »
I have more  Magnum  52s  coming, and  those  will be  a  really great choice for an inexpensive engine ,  They also are built well  true  ABC and  have a lot of power

Randy

Offline Andy Mutziger

  • 23 supporter
  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 11
Re: SV11 engine?
« Reply #35 on: November 20, 2019, 06:30:22 AM »
Hi All - Thank you for the great info in this thread. I have a couple questions though I was hoping to get your input. I have a new OS FP 60 w a Motorman veturi and NVA. Didn't see discussion on this engine and wondering what the consensus is on this engine option?  Also what are your thoughts on either a ringed ST 51 or a 61 for this plane. Thank you very much in advance.  Andy
Santa Margarita, CA
AMA 1123392

Offline Mike Callas

  • 21 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 333
Re: SV11 engine?
« Reply #36 on: November 25, 2019, 05:56:04 PM »
Andy,
Is it too late to consider a Stalker 76? Just chugs along on FAI fuel.

Offline Shug Emery

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1597
  • Whoooo Buddy))))
    • Sean Emery funny guy juggling and stuff
Re: SV11 engine?
« Reply #37 on: March 30, 2020, 09:40:36 PM »
Just got my SV-11 ARF put together. Put a PA 75 in it. Can't wait to see it go.
Shug



Whoooooo Buddy)))))))

Offline Mike Callas

  • 21 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 333
Re: SV11 engine?
« Reply #38 on: March 31, 2020, 04:32:10 PM »
Nice! What prop is that??

Mike


Just got my SV-11 ARF put together. Put a PA 75 in it. Can't wait to see it go.
Shug





Offline Shug Emery

  • 2018 Supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 1597
  • Whoooo Buddy))))
    • Sean Emery funny guy juggling and stuff
Re: SV11 engine?
« Reply #39 on: March 31, 2020, 05:00:03 PM »
Nice! What prop is that??

Mike
Carbon fiber prop. Got it from Randy Smith at Aeroproduct....http://www.aeroproduct.net
Whoooooo Buddy)))))))


Advertise Here
Tags:
 


Advertise Here