Building Tips and technical articles. > ARF'S

blank

(1/2) > >>

Motorman:
blank

Steve Nelson:
Mine was poorly aligned and most of the glue pooled to one corner.  I applied some warm air from a heat gun snd using light pressure with my finger, was able to lift it off.  Now looking for a good solvent to soften whatever glue they used and clean up the csnopy before re-ataching again.

fred cesquim:
 Most likely rc56 glue . water softens and you can clean up . Leave a wet rag in cotact for some time and will soften.
Have used this to glue RC arfs canopies for ages

Howard Rush:
Make sure the canopy gets put back on right. I see lots of stunt planes with the canopy on backwards.

Dennis Nunes:

--- Quote from: Howard Rush on February 28, 2021, 05:40:34 PM ---Make sure the canopy gets put back on right. I see lots of stunt planes with the canopy on backwards.

--- End quote ---
Hey Howard, is this one of them?   LL~

Dennis

Navigation

[0] Message Index

[#] Next page