News:



Advertise Here

  • August 18, 2022, 07:27:06 AM

Login with username, password and session length

Author Topic: blank  (Read 2078 times)

Offline Motorman

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2999
blank
« on: April 05, 2018, 04:24:53 PM »
blank
« Last Edit: December 08, 2021, 12:22:45 PM by Motorman »

Offline Steve Nelson

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 3
Re: SV-11 Canopy Removal
« Reply #1 on: February 19, 2021, 07:14:00 PM »
Mine was poorly aligned and most of the glue pooled to one corner.  I applied some warm air from a heat gun snd using light pressure with my finger, was able to lift it off.  Now looking for a good solvent to soften whatever glue they used and clean up the csnopy before re-ataching again.

Offline fred cesquim

  • Trade Count: (0)
  • Captain
  • *****
  • Posts: 631
    • Fred Cesquim Aeromodelos
Re: SV-11 Canopy Removal
« Reply #2 on: February 28, 2021, 02:56:26 PM »
 Most likely rc56 glue . water softens and you can clean up . Leave a wet rag in cotact for some time and will soften.
Have used this to glue RC arfs canopies for ages

Offline Howard Rush

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7601
Re: SV-11 Canopy Removal
« Reply #3 on: February 28, 2021, 05:40:34 PM »
Make sure the canopy gets put back on right. I see lots of stunt planes with the canopy on backwards.
The Jive Combat Team
Making combat and stunt great again

Offline Dennis Nunes

  • 22 supporter
  • Trade Count: (0)
  • Commander
  • *
  • Posts: 284
Re: SV-11 Canopy Removal
« Reply #4 on: February 28, 2021, 06:43:12 PM »
Make sure the canopy gets put back on right. I see lots of stunt planes with the canopy on backwards.
Hey Howard, is this one of them?   LL~

Dennis


Offline Eric Krohn

  • Trade Count: (0)
  • New Pilot
  • *
  • Posts: 3
Re: SV-11 Canopy Removal
« Reply #5 on: May 23, 2021, 11:17:17 AM »
Easy as I had to remove my 2 SV11 and my vectors canopy use  hair dryer as a monkote heat gun is to hot and will distort the canopy then I used a plastic card like a credit cardvto run around and break the glue seam. I then cleaned the old glue residue with laquire thinner reinstalled one with clear Silicon and installed the others with 1/4 black automotive stripping tape looks nice.

Offline Avaiojet

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 7480
  • Just here for the fun of it also.
Re: SV-11 Canopy Removal
« Reply #6 on: May 23, 2021, 03:05:27 PM »
Hey Howard, is this one of them?   LL~

Dennis

Interesting design on the nose.  ;D
Trump Derangement Syndrome. TDS. 
Avaiojet Derangement Syndrome. ADS.
Amazing how ignorance can get in the way of the learning process.
If you're Trolled, you know you're doing something right.  Alpha Mike Foxtrot. "No one has ever made a difference by being like everyone else."  Marcus Cordeiro, The "Mark of Excellence," you will not be forgotten. "No amount of evidence will ever persuade an idiot."- Mark Twain. I look at the Forum as a place to contribute and make friends, some view it as a Realm where they could be King.   Proverb 11.9  "With his mouth the Godless destroys his neighbor..."  "Perhaps the greatest challenge in modeling is to build a competitive control line stunter that looks like a real airplane." David McCellan, 1980.


Advertise Here
Tags:
 


Advertise Here