stunthanger.com
Building Tips and technical articles. => ARF'S => Topic started by: tom brightbill on June 14, 2016, 07:09:05 PM
-
I was recently given a SV-11 ARC, but without instructions. It's all pretty straight forward except for a few pieces that I imagine are for the cowl or maybe lower fuse fairing. They are four plywood pieces about .62 wide and 6" long, two of which are straight and the other two angled. Also four pieces of .12 balsa about 1.25 x 1.25 that might be gussets. I'd like to get a copy of the instructions if possible. Thanks.
-
Hey Tom, who produced the ARC
-
Brodak
-
I wondered if perhaps it was,
I would suggest you call Brodaks they are awesome about helping out
I know you bought it used, ( so to speak_) but I am sure they could hook you up,
No doubt they may even have it in a pdf
-
Hey Mark, I had checked on their web site a few different ways and couldn't find anything. But taking your advice, I called Patty and she found one somewhere! Brodak comes through again!!! #^
-
Hey Mark, I had checked on their web site a few different ways and couldn't find anything. But taking your advice, I called Patty and she found one somewhere! Brodak comes through again!!! #^
cool