Author Topic: Smoothie ARF strip and re-do (Read 7560 times)

Larry Renger · « **Reply #50 on:** July 01, 2008, 05:04:25 PM »

It is a 25% scale up of the 1/2A handle. I am attaching a photo of that.

The handle has rectangular inserts that define the line spacing, and due to the way the Lead-outs run over them, you get exponential control so you have a very smooth flight at the center while still having the control power for hard corners.

John Paris · « **Reply #51 on:** July 02, 2008, 09:39:04 AM »

Larry,
Thanks for picture. The way you had described it, I figured that there was some exponential feature.
John

Alan Hahn · « **Reply #52 on:** July 02, 2008, 10:01:05 AM »

I'm a sucker for handles. I have your 1/2A version. Is the new 25+ version "out in the wild" yet?

Larry Renger · « **Reply #53 on:** July 07, 2008, 11:14:09 AM »

Check the RSM catalog. It should be in there. If not, E-mail Eric.

Wynn Robins · « **Reply #54 on:** July 09, 2008, 06:09:25 PM »

hand cut stars.... SHEESH - you know you can buy craft foam cutters that are Star shaped - they work on film too -

Larry Renger · « **Reply #55 on:** July 11, 2008, 08:23:22 AM »

But I needed 2 sizes!

Actually, I do have a star cutter, but I only located it this last week. Maybe next plane ....

Author Topic: Smoothie ARF strip and re-do (Read 7560 times)

Larry Renger

Re: Smoothie ARF strip and re-do

John Paris

Re: Smoothie ARF strip and re-do

Alan Hahn

Re: Smoothie ARF strip and re-do

Larry Renger

Re: Smoothie ARF strip and re-do

Wynn Robins

Re: Smoothie ARF strip and re-do

Larry Renger

Re: Smoothie ARF strip and re-do