stunthanger.com

Building Tips and technical articles. => ARF'S => Topic started by: John Craig on March 08, 2015, 06:46:01 AM

Title: Primary Force
Post by: John Craig on March 08, 2015, 06:46:01 AM

I am going to try to repair a Primary Force with extensive damage to the front end of the fuselage.  

Can someone give me the length of the forwad fuselage from the wing leading edge to the tip of the nose?

Thanks

Title: Re: Primary Force
Post by: Dan McEntee on March 08, 2015, 08:11:29 AM

   From the leading edge to the end of the nose is 7 1/2". A good habit to get into with ARF profiles is to make an outline tracing of the fuselage, including the wing cut out, before you assemble the airplane. A set of plans from PAMPA or Mike Pratt comes in handy also, although the wing structure is a bit different. Good luck with the project.
  Dan McEntee