News:



  • May 24, 2024, 10:51:09 AM

Login with username, password and session length

« previous next »
Pages: [1]   Go Down

Author Topic: My Nobler ARF...  (Read 2545 times)

Offline Tim Redelman

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 114
My Nobler ARF...
« on: January 10, 2014, 11:47:42 PM »
Here's my rendition of the Nobler ARF. I strengthened the nose and then tested it  LL~

Tim
Logged

Offline Tim Redelman

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 114
Re: My Nobler ARF...
« Reply #1 on: January 10, 2014, 11:50:55 PM »
Pictures are too big....
Logged

Offline Tim Redelman

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 114
Re: My Nobler ARF...
« Reply #2 on: January 10, 2014, 11:52:40 PM »
But at least you can see them,,,  I made some 1/16 ply gussets and some tri stock to beef things up a little.

 I also put some balsa between the mount bearers. Stiffened the front up immeasurably..

Tim
« Last Edit: January 11, 2014, 12:12:45 AM by Tim Redelman »
Logged

Offline Tim Redelman

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 114
Re: My Nobler ARF...
« Reply #3 on: January 10, 2014, 11:54:35 PM »
Brodak 40. I also added a Brodak 4 oz inflow tank.

Tim
« Last Edit: January 11, 2014, 12:13:19 AM by Tim Redelman »
Logged

Offline Tim Redelman

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 114
Re: My Nobler ARF...
« Reply #4 on: January 10, 2014, 11:55:24 PM »
Before.....
Logged

Offline Tim Redelman

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 114
Re: My Nobler ARF...
« Reply #5 on: January 10, 2014, 11:57:04 PM »
DOH!!! And after. Pulled out a little to low in some 16" high alfalfa..... Cruched the cowl a bit but everything else was fine.... I suck!
Logged

Offline Tim Redelman

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 114
Re: My Nobler ARF...
« Reply #6 on: January 10, 2014, 11:58:18 PM »
My new Nobler before the crunch... I need to glue the canopy and put the stickers on some day...Finished plane rtf is 43 Oz's.

Tim
Logged

Offline Tim Redelman

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 114
Re: My Nobler ARF...
« Reply #7 on: January 10, 2014, 11:59:15 PM »
My Launch stooge.... A Brodak part of course.. This is something you could easily make yourself but I was in Paul's Model supply in Fargo and he had one on the wall. So I said hmmm thats easy too. So I took a fully Edge banded cabinet shelf and screwed er down. I figured this way it was easy to wipe off and will stay clean for the most part.

Tim
« Last Edit: January 30, 2014, 07:40:33 PM by Tim Redelman »
Logged

Offline Leester

  • 2014 Supporters
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2530
Re: My Nobler ARF...
« Reply #8 on: January 14, 2014, 03:41:57 PM »
Hey better to crash the ARF than one you build from scratch or kit !! The fuselage IS weak but the wing is sturdy, after I crashed mine beyond repair I used the wing in a profile project I made..
Logged
Leester
ama 830538

Advertise Here
Pages: [1]   Go Up
« previous next »
Tags:
 


Advertise Here