stunthanger.com

Building Tips and technical articles. => ARF'S => Topic started by: Andrew Tinsley on July 08, 2016, 09:44:53 AM

Title: Help needed to identify an ARF
Post by: Andrew Tinsley on July 08, 2016, 09:44:53 AM

I have acquired an ARF and I am not sure what it is. Looks like maybe an SV11 or perhaps a Vector. it has that Randy Smith look, but I don't know his designs well enough to tell what it is! Can someone post a picture of these two?
It has a black / white finish with some horrible yellow and red near the wing roots. I shall recover it anyway after the necessary surgery has been done!

Andrew.

Title: Re: Help needed to identify an ARF
Post by: Mark Scarborough on July 08, 2016, 10:09:25 AM

some dimensions would probably help, or a picture of what you have.
there is a fairly obvious difference in the size between the Vector and the SV-11

Title: Re: Help needed to identify an ARF
Post by: Andrew Tinsley on July 08, 2016, 11:58:21 AM

I will try and take a picture and post it. Problem is that when resizing it  for upload I run into difficulties! Will try another resizing programme.

Thanks,

Andrew.

Title: Re: Help needed to identify an ARF
Post by: Andrew Tinsley on July 08, 2016, 01:42:23 PM

Hello,
Problem solved, it turns out that it is an Intrepid XL. I did not know that they were available as an ARF. The finish is exactly the same as the photo ID, so I assume it is an ARF? Can anyone confirm that they were available as an ARF sometime in the past?

Thanks,

Andrew.