Guys,
Just an update, problem finally solved. After test flying with the new corrected incidences it still had issues with being soft around neutral and then having jumpy control inputs, took us a while to figure it out, but it was the adjustable lead out slider that I installed. When you moved the controls while not under tension of flying, they moved just as free as could be.....but when you moved them while putting tension on them, they moved very stiff, almost binding. After cutting it open to look inside, turns out the front lead out was rubbing part of the structure I built around the lead out slider. This was causing it to bind enough under pressure where when I gave the input control i had no movement, so I had to provide more input with no movement and then all of a sudden, the model would jump either up or down.
I have been chasing my own control inputs. Now I am sure that the incidence was a problem as well, but I am thinking that this was the major culprit.
It flies great now.