News:

 

CLICK HERE--><--CLICK HERE

Craft 2100 ARF from Powers International ?

Started by Walter Hicks, May 20, 2018, 12:46:38 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Walter Hicks

 Has anyone done business with this outfit from Japan.? It appears to be a 60 sized ARF Profile and possibly other CL ARF it is  from Japan
so I would need to get information translated . New plane is an ARF 60 sized  profile called Craft 2100



Walter Hicks

I have attempted to contact them via facebook messenger no answer? It is in Japanese so I am not sure they will respond ? I found an email for them and sent that today .

Walter Hicks

#4
I got a response from them I had to email overseas@powers-international.com. Looks to be a .60 sized ARF  60" span .They say it is 31 oz airplane only :) I have one on order not cheap but appears to be a great looking 60 sized profile. 

Walter Hicks

#5
 60 sized ARF  60" span  weight without motor etc  900 gram = 31oz.
I have one on order now.

mike londke

Looks good but almost $300 if I used the right converter.
AMA 48913  USPA D-19580  NRA Life Member  MI State Record Holder 50 way Freefall Formation Skydive  "Don't let the planet sneak up on you"

Mike Alimov

Any update on this, Walter? Did you receive it? Flown? Quality? First impressions?

Walter Hicks

#8
It is late at night I will take more pictures and weigh items when it is light. Unsure regarding bell crank and lead outs , I may replace those.
Stab, Elevators and Flaps very straight and light. Covering is Perfect .... It comes with a CD with pictures of build, in Japanese of course.

Stab has covering already removed in center no need cut covering same with wing.



Stab /elevator straight and very rigid. covering is perfect.

Mike Alimov

Please continue your updates!  Very interesting. 
Another question: did it really take you 4 months since placing the order to receive one?  (Your last post on May 30 said you had one on order).  That's a mighty long lead time!

Walter Hicks

Yes it did I placed the order early to get the discount price. They said it would be shipped in Sept so I knew that.

Mike Alimov

Could you please report individual component weights

Walter Hicks

Weights as follows - NOTE all componets covered.

Wing with Bellcrank leadouts, leadout guide, tip weight box    = 11.4

Stab/Elevator                                                                      =  3.0

Flaps                                                                                  =   2.2

Fuse                                                                                   =  7.9

Rudder                                                                               =    .3

Canopy   (carbon fiber)                                                        =   .2

Landing gear 1/8 aluninum                                                   = 1.9

Hardware packet (wheels, motor mts , screws etc)                 = 2.9

TOTAL                                                                                 =29.8

Walter Hicks

#13
Note this plane is an all inline profile with some very interesting control horn set ups not sure if I will do this per ARF set up or not.
Bellcrank in aluminum as are bolt on control horns , the wire joiners appear to be 1/8  or so. The front of the fuse also has foam in the center on some spots. Very Interesting and very, very good quality fits are perfect.

NOTE: Pictures taken from PDF Manual that was on a Cd provided with the plane not super clear hear is the one with the Flap horn configuration
flap pushrod  connects below and elevator pushrod connects above flap--

Walter Hicks

#14
Wing comes in two pieces and is joined in a clever way with three 3/16 or so pieces of spruce and the fits are PERFECT!!!!!!!



Walter Hicks

#15
Motor mounts are only about  four inches long and shims are provided for different widths.-You glue them in at desired width for engine ,



Walter Hicks

#16
Canopy is carbon fiber , shown with hardware pack.



Walter Hicks

#17
Somewhat fuzzy but good picture of what the wing, stab/elevaor ,rudder and fuse look like, + contents of ARF


john e. holliday

What was actual price?    It does look good compared to some I've seen H^^
John E. "DOC" Holliday
10421 West 56th Terrace
Shawnee, KANSAS  66203
AMA 23530  Have fun as I have and I am still breaking a record.

Mike Alimov

Thanks for the info so far. I assume that what you call an " interesting" horn arrangement is due to the inline layout, and keeps the pushrod from running into flaps/stab.  Very reasonable solution, and I don't see a reason to circumvent it.
On the other hand, the other design decisions that seem puzzling to me: 1) carbon canopy?! No strength is required here. A clear plastic ( tinted if desired) would've been cheaper and more attractive; 2) the fuselage joint is located at the rear of the wing; that's where profile fuselages tend to fail during impact.  I would attempt to reinforce this joint as much as possible.

Walter Hicks

As far as the Actual Price = You get what you pay for. This was made in Japan and is excellent in every way, wood selection craftmaship, design, covering , hardware. I paid 28,000 Yen + , yen shipping= $320.80  of which $75 was for shipping which I do not have a problem with given the quality of what I got. We do not have appearance points for profile so I do not have a profile finished yet and this one can be used as a test bed for motors as I will use a U shaped 1/8" Aircraft grade
aluminum motor mount that I can switch easily for each motor.

How many 60 sized profile arf weigh 28.9 oz without the motor :) Actual ARF price without shipping was $246 which is not much more than ones we get and an excellent product especially the weight.

Walter Hicks

#21
Mike , I do think that the Carbon Fiber canopy does have a function as the fuse is joined around that area and I believe that is there for strength.



NOTE that the fuse is joined together a couple of inches ahead of the leading edge of the  wing so the wing will provide strength and well as the carbon fiber canopy which I believe is for structure strength as well . I will go ahead and use the supplied control horns as shown.

Steve Berry

I'm very interested in how this does. If it flies like it looks, I may have a new "toy" for Christmas, or at least next February/March after income tax return. I have a ST G-51 that needs a good home.

Carl Cisneros

What engine are you going to initially use on it?

Thanks
Carl R Cisneros, Dist IV
Control Line RB

Walter Hicks

Have not decided for sure I will use Gardner ABC ST .60 becuase it will go in a Classic plane at a later date and I want to see the run characteristics,
RO Jett 67 Se if it does not make it too nose heavy, I have a Staker 51 SE that is much lighter that the St or RO Jett if necessary . A lot will depend on how it balances and what weight the engine needs to be !!!! I have a Gardner ABC LA 46 that would probably haul it at the weight it will turn our at.
I also have Gardner ABC ST .46 that may work also.


Advertise Here