Author Topic: Any Impact ARCs out there yet? (Read 4421 times)

SteveMoon · « **on:** February 04, 2011, 02:19:28 PM »

After several months and over half of our shipment sold I have yet to
see a pic of an Impact ARC. Have any been completed and flown yet?
I'd sure like to see some pics and hear how they fly. I know how mine
flies: great!

Later, Steve

Eric Viglione · « **Reply #1 on:** February 05, 2011, 09:09:50 AM »

Steve - did you supply snow skis with the kits?

EricV

Chris McMillin · « **Reply #2 on:** February 05, 2011, 06:12:43 PM »

Hi Steve,
Mine is in the STL crashpad. I got out all of the parts and they looked good. Should start soon on it because I want to paint it in April.
Chris...

Ron Merrill · « **Reply #3 on:** February 07, 2011, 09:40:39 AM »

Steve, as soon as i figure what pipe to put on my Rojett .61, i will proceed.

Ron.

Howard Rush · « **Reply #4 on:** February 07, 2011, 05:44:44 PM »

I recommend using whatever Brett is using. I have an ESComposites pipe modified to Norm Whittle's spec in my Impact with a RO-Jett .65. It works fine, too.

Ron Merrill · « **Reply #5 on:** February 09, 2011, 10:38:52 AM »

Thanks Howard, i will contact Brett and then Randy.

Ron.

Jim Treace · « **Reply #6 on:** March 03, 2011, 09:35:34 PM »

Quote from: SteveMoon on February 04, 2011, 02:19:28 PM

After several months and over half of our shipment sold I have yet to
see a pic of an Impact ARC. Have any been completed and flown yet?
I'd sure like to see some pics and hear how they fly. I know how mine
flies: great!

Later, Steve

Well, I just completed my Impact ARC. Used Monocoat on wing and Lusterkote every where else. Power is K&B .61, which runs great on the ground. ARC was pretty easy to put together and very pleased with 57 oz total weight. If the rain holds off and the creeks don't rise, I may get it in the air tomorrow. Jim

SteveMoon · « **Reply #7 on:** March 04, 2011, 08:31:18 AM »

Hi Jim, that looks great. The Monokote job looks really good.
Can't wait to here how it flies. If you can get some good pics
of it out in the grass feel free to send some to my email address
at: ultrahobby@cs.com and I'll put them on the website.

Later, Steve

Jim Treace · « **Reply #8 on:** March 04, 2011, 10:54:58 PM »

Quote from: SteveMoon on March 04, 2011, 08:31:18 AM

Hi Jim, that looks great. The Monokote job looks really good.
Can't wait to here how it flies. If you can get some good pics
of it out in the grass feel free to send some to my email address
at: ultrahobby@cs.com and I'll put them on the website.

Later, Steve

Hey Steve,
Will do,that is as soon as this nasty weather here in NW Tennessee passes. Suppose to be a rotten weekend!

Paul Taylor · « **Reply #9 on:** March 06, 2011, 02:20:00 PM »

Hey Jim,
Could be worse, your boat could be floating in the front yard!

Or you could be here.... Cold, cloudy and windy.

Looks great!

Jim Treace · « **Reply #10 on:** March 07, 2011, 08:41:52 PM »

Quote from: Paul Taylor on March 06, 2011, 02:20:00 PM

Hey Jim,
Could be worse, your boat could be floating in the front yard!

Hey Paul,
You've seen it...my boat does float in my front yard...well almost!
Jim

Paul Taylor · « **Reply #11 on:** March 08, 2011, 07:03:53 AM »

Yea, and that is a big boat to be sitting in anyone's front yard. You can't haul that thing with a monster SUV.

Hope you can come up this spring so I can see this plane.

Darkstar1 · « **Reply #12 on:** March 08, 2011, 11:52:55 AM »

Steve,
Check out my facebook page.

Peter Ferguson · « **Reply #13 on:** December 17, 2011, 07:34:12 AM »

Ampact
E-flite 32 front mounted
ICE lite 75 SC
Hubin 9VR timer
Thunder Power 5S 2700mah battery
64.5 oz with battery
5.5 lab times on 65' lines

Ron Merrill · « **Reply #14 on:** December 17, 2011, 08:38:49 AM »

Peter, WOW what a nice build and paint job.

Ron.

john e. holliday · « **Reply #15 on:** December 17, 2011, 09:43:16 AM »

If that plane flies as well as it looks, you have a winner. Also old age or dead brain took a while to figure out the PSF in front of your number.

SteveMoon · « **Reply #16 on:** December 18, 2011, 09:52:00 AM »

Wow Pete, that looks great! I would really like to add that to
our Customer Projects page on the UHP website if you don't
mind. Can you e-mail some pics to: ultrahobby@cs.com

Thanks, Steve

Mike Ferguson · « **Reply #17 on:** December 19, 2011, 08:34:23 AM »

Nice!

Paul Raley · « **Reply #18 on:** March 25, 2012, 07:25:03 AM »

Hi Folks,
I have nearly finished my UHP ARC Impact. As you can see, I opted for a certain west coast style paint scheme. Power is via OS40VF and bench trimmed weight is 66 oz. Many thanks to Howard Rush for his assistance with the graphics and answering many questions! Even though it was an ARC, it still took me nearly three months to complete. Thanks to Steve Moon for offering a great product!

Paul Raley
Leonardtown MD

john e. holliday · « **Reply #19 on:** March 25, 2012, 07:50:34 AM »

That looks great.

Joe Yau · « **Reply #20 on:** March 25, 2012, 09:25:31 AM »

Nice job! love the graphics..

Howard Rush · « **Reply #21 on:** March 25, 2012, 04:36:33 PM »

Quote from: Joe Yau on March 25, 2012, 09:25:31 AM

Nice job! love the graphics..

Me, too.

Mike Keville · « **Reply #22 on:** March 25, 2012, 05:00:57 PM »

Quote from: Howard Rush on March 25, 2012, 04:36:33 PM

Me, too.

Big surprise. Looks familiar. <grin>

Brett Buck · « **Reply #23 on:** March 26, 2012, 05:56:49 AM »

Quote from: Howard Rush on March 25, 2012, 04:36:33 PM

Me, too.

Should we tell him not to fly it with a Hot Rock?

Brett

SteveMoon · « **Reply #24 on:** March 26, 2012, 11:40:38 AM »

Paul, that looks great! Please email me some pics to: ultrahobby@cs.com.
I'd like to add it to our customer projects page.

Thanks, Steve

PJ Rowland · « **Reply #25 on:** March 28, 2012, 11:51:49 PM »

Its missing a critical part !!!!!!

Howard can tell you what its missing.

Tom Taylor · « **Reply #26 on:** April 19, 2012, 07:40:16 AM »

My first electric attempt for the intermediate level that I am now at. My appoligies to Steve Moon for coping the finish and thanks to Tim Stagg who answers my off the wall questions dealing with electric configurations. It has an E-Flite 32 motor, Hubin FM-9 timer and Castle Ice 50 Lite ESC. Hope that it trims out for my flights at Brodak this year.

Author Topic: Any Impact ARCs out there yet? (Read 4421 times)

Eric Viglione