stunthanger.com
Vendors Corner => Aero Products => Topic started by: Dan McEntee on June 19, 2013, 09:44:18 PM
-
Hi Randy;
If you can, could you put up a three view of the Steve Buso Hercules? I saw a glimps of it on a Mike Griffen thread in the main forim where a model was sitting on the plan. I'm interested I what it looks like and other specs. I have a vintage enduro type dirt bike ( 2 of the, actually) called Hercules, and curiosity is getting to me.
If I want a set of plans, do you have them in stock?
Thanks alot,
Dan McEntee
-
Hi Randy;
If you can, could you put up a three view of the Steve Buso Hercules? I saw a glimps of it on a Mike Griffen thread in the main forim where a model was sitting on the plan. I'm interested I what it looks like and other specs. I have a vintage enduro type dirt bike ( 2 of the, actually) called Hercules, and curiosity is getting to me.
If I want a set of plans, do you have them in stock?
Thanks alot,
Dan McEntee
Hi Dan
Sorry I do not have a 3 view. I have most all of Steve's plans but they are not on CAD, all are hand drawn,so I don't have 3 views, I will look for a picture of it for you
The plane is 61 in span, about 700 sq in, and is similar in looks to the Jaguar -Cascade
All of Steve's planes are good.
-
Hi Randy;
Somebody posted a 3 view on the main forum that Sina Godarza made up of the airplane. If you have the plans on CAD, can you run them off in a reduced version? 700 squares is pretty big, but not sure what size I want. The consideration is getting it into my van the way I haul airplanes. I'm in no hurry for this and will look at the numbers. Like I said, the name interested me, and I am familiar with Steve's work. I just bought an old free flight kit of a PeeWee 30 model he designed! I was at the Lawrencville NATS where Steve had the ZAP Machine, '92 or '93. I think that was the same year you had the two prop set up also. Anyhow, Thanks for checking and I'll get back to you.
Type at you later,
Dan McEntee
-
Hi Dan
Sorry what i meant was these and all of the Buso planes are all hand drawn, so none are in CAD
Randy