stunthanger.com

Vendors Corner => Aero Products => Topic started by: RandySmith on January 15, 2017, 07:38:12 PM

Title: PA needle valves assemblies back in stock
Post by: RandySmith on January 15, 2017, 07:38:12 PM
PA  needle valves assemblies  back in stock, along  with all parts

Regards
Randy            678 407 9376     Randyaero@msn.com
Title: Re: PA needle valves assemblies back in stock
Post by: Steve Dwyer on July 01, 2018, 09:04:42 AM
Randy,

 I'm trying to convert an OS FP 40 over to control line, tower doesn't show the NVA assemblies available, someone said I should check with you that your PA assembly should work. Do you recommend your assembly for the FP40 and what is the charge? Do you have any info on the PA, photos etc.?

Steve
Title: Re: PA needle valves assemblies back in stock
Post by: RandySmith on July 02, 2018, 08:52:13 AM
Randy,

 I'm trying to convert an OS FP 40 over to control line, tower doesn't show the NVA assemblies available, someone said I should check with you that your PA assembly should work. Do you recommend your assembly for the FP40 and what is the charge? Do you have any info on the PA, photos etc.?

Steve

Hi Steve  the  PA  is the  best  NVA, but you will have to drill the case across for the  NVA, it is same diameter  as the  ST  Enya  and  old  OS
you would use a  281 venturi with my PA or  ST  Enya, the  Stock  NVA  uses a  .255  venturi   The  pa  is  19.99   venturis  are  12.00   . I have  a few  OS  NVAs left, they are 19.99  each
So I can supply you with  whatever  you  want ,  and  I also have  100s  of parts in stock for  other  OS  LA  engines  and many FPs

Randy  678 407 9376