stunthanger.com
Vendors Corner => Aero Products => Topic started by: RandySmith on May 19, 2009, 11:13:36 PM
-
The NEW ENYA 32 Pro BB Stunt motors are now in stock. I have both side and Rear EX in stock. Plus I have the Rear header in stock for them also
I will post pictures , and more info tommorow
These are very nice dual balll bearing 32, 1 is a side Exhaust with muffler, sells for around 130.00 the other is a rear exhaust 32 ,engine alone, that sells for 144.00. I have light CNC tube mufflers, and rear headers for the Enya 32 RE
They are The 32 CXLS rear and 32CXS side
Randy
-
The NEW ENYA 32 Pro BB Stunt motors are now in stock. I have both side and Rear EX in stock. Plus I have the Rear header in stock for them also
I will post pictures , and more info tommorow
These are very nice dual balll bearing 32, 1 is a side Exhaust with muffler, sells for around 130.00 the other is a rear exhaust 32 ,engine alone, that sells for 144.00. I have light CNC tube mufflers, and rear headers for the Enya 32 RE
They are The 32 CXLS rear and 32CXS side
Randy
I know its too early with this new engine to have any real world experience with it, but what is you best guess as to the upper range of plane size that it will be a good match for. I talking about the RE on a pipe.
-
Hi Allan
I would think easily,t would pull a 55 ouncer, although A VECTOR 40 Size plane would be ideal at about 44 ounces
Randy
-
By any chance would the Enya Pro 32 use the same mounting bolt pattern as the Evo/Magnum/TT/AeroTiger 36 engines?
Thanks Randy 8)
-
Hi Pete
No it is not exact, but it is very close, it will be no problem retrofitting one in. and the case width is just a tiny bit smaller on the Enya
-
How close would the .32 side exhaust fit a fox .35 mounting. I picked up a decent Nobler that had the Fox .35 and was looking at this engine for it.
Thanks,
Mike
-
How close would the .32 side exhaust fit a fox .35 mounting. I picked up a decent Nobler that had the Fox .35 and was looking at this engine for it.
Thanks,
Mike
Hi Michael
The motor is not a drop in fit for a FOX 35, it is much longer
Randy