stunthanger.com
Vendors Corner => Aero Products => Topic started by: RandySmith on July 25, 2012, 02:40:34 PM
-
2 - 12x 4 N 3 blade new in pack $44.00 sold
2- 12-11x4N 3 blade NIP $42.00 great prop for many 36 to 40s sold
1- 11 3/4 x 4 1/4 2 blade $34.00 great for VF 40 46 or PA 51 ... 3 sold....
2- 11 1/4 x 4 N 2 blade $32.00 Great for many 36 to 40s
2- 12 x 4 N 2 blade $36.00 Great for many 40s and 46s
1- 12 1/4 x 4 1/4 2 blade $36.00 Great for PA 51 VF 46 LA 46 etc
Plus s&h
first in first out
Randy Smith
678/407/9376
www.aeroproduct.net
-
Randy -- I will buy the 12 x 4 N 3 blade .... private message sent....thx !
-
Randy -- I will buy the 12 x 4 N 3 blade .... private message sent....thx !
Hi Gene
Didn't get a message but I will hold it for you
Randy
-
Hi Randy, sent you a PM
-
Randy, just sent you a PM.
-
HI Randy,
I would like the 11-4N 3 blade.
Are these private stock or Aero Products inventory?
Thanks
Bill
-
HI Randy,
I would like the 11-4N 3 blade.
Are these private stock or Aero Products inventory?
Thanks
Bill
I can do these anyway you need to, either pay to me or Aero products, check or CC
Randy
-
I can do these anyway you need to, either pay to me or Aero products, check or CC
Randy
Thanks!
Bill
-
11 3/4 x 4 1/4 2 blade $34.00 great for VF 40 46 or PA 51
Sent you email on these.
-
Randy,
Still interested in the 11x4N three blader but I haven't heard back from you. Please check your PM box.
Thanks! H^^
-
Randy,
Still interested in the 11x4N three blader but I haven't heard back from you. Please check your PM box.
Thanks! H^^
Hi Wayne,
I *bought* it on the 28th unless you PM'ed Randy before then. ?? If so, then it's yours.
Bill
-
Bill,
Randy's list here shows two of them for sale, I'm only after one. I initially contacted him in the post here on the 27th. After that I had requested a photo because I'm not sure if I'm familiar with the blade shape of the "N" version and I'd just like to get a look before I commit. I haven't heard back from Randy on that yet. I went to Bolly's site and couldn't find a photo of one either. D>K
-
Randy,
Still interested in the 11x4N three blader but I haven't heard back from you. Please check your PM box.
Thanks! H^^
Hi Wayne I have 2 of them but you asked me take take pictures and send them to you, I have not had time to do this yet, so I have not sent a reply to you, I was away for over a week at the NATs and am swamped in stuff to do, It will be several more days before I can take pictures and send them to you
Regards
Randy
-
That's ok Randy, no problem. I just hadn't heard back and don't want you to forget that I'm interested. H^^
-
Bill,
Randy's list here shows two of them for sale, I'm only after one. I initially contacted him in the post here on the 27th. After that I had requested a photo because I'm not sure if I'm familiar with the blade shape of the "N" version and I'd just like to get a look before I commit. I haven't heard back from Randy on that yet. I went to Bolly's site and couldn't find a photo of one either. D>K
HI Wayne,
Didn't realize there were two for sale so all's good! ;D
BIG Bear
RNMM/AMM
-
Got time for a photo yet Randy? D>K :)
-
Hello...Randy...? :)
-
typical Bolly 12 x 4 n , the 11 x 4 I have is 12 inches long, they were all made in the one mold which is a 12 inch mold
-
Thanks for the pic Randy. I'll take one of the 11x4's you're offering then.
Please bear with me here as I'm not super familiar with the grubby details of the Bolly line. I've got a few questions:
A) You mention that the 11x4 is actually 12 inches because of the mold. Does that mean it's really a 12x4 and then one has to cut it down to end up with an 11X4 or?
B) Are Bolly props typically ready to run out of the package, or do they require cleaning up like a prop fresh from a mold?
C) Are the "N" props typically more desirable or?
-
Randy,
Please check your PM box, I requested a purchase a few days ago and haven't heard from you yet.
Thanks.