News:


Advertise Here

  • May 23, 2022, 06:01:20 PM

Login with username, password and session length

Author Topic: MNT Handle Dimensions  (Read 3596 times)

Offline Damian_Sheehy

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 89
MNT Handle Dimensions
« on: December 12, 2010, 08:10:28 PM »
Can anyone provide the dimensions for the 80 and 85 MNT hardpoint handle?
Does the handle come with two lugs? It looks like there is only one pictured which seems a little strange to me. . .

When I go to Home Depot to choose a pair of garden gloves I must confess I have to choose from the ladies rack. But I am very happy to have a dexterous and creative pair of hands.  ;D

Thank you,

Damian

« Last Edit: December 13, 2010, 03:26:24 PM by Damian_Sheehy »

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12773
  • Second in COMMAND
Re: MNT Handle Dimensions
« Reply #1 on: December 12, 2010, 09:54:33 PM »
HI Damian,

Not Randy, but as far as I can tell, the "85" stands for the millimeters of open space in the "hand" part between the arms.

The "lugs" in the picture are the adjustable arms that go into the top and bottom of the handle.  The do allow some overhang adjustment, and of course line spacing.  There are two included, made of thin steel.  All the screws are allen/socket head and metric and a set of allen wrenches are included.

I am sure Randy will comment and correct me if I am wrong.

Bill
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Offline Damian_Sheehy

  • 2017
  • Trade Count: (0)
  • Lieutenant
  • *
  • Posts: 89
Re: MNT Handle Dimensions
« Reply #2 on: December 13, 2010, 03:31:32 PM »
HI Damian,

Not Randy, but as far as I can tell, the "85" stands for the millimeters of open space in the "hand" part between the arms.

The "lugs" in the picture are the adjustable arms that go into the top and bottom of the handle.  The do allow some overhang adjustment, and of course line spacing.  There are two included, made of thin steel.  All the screws are allen/socket head and metric and a set of allen wrenches are included.

I am sure Randy will comment and correct me if I am wrong.

Bill


Thank you very much, Bill. This gives me a good idea of the overall proportions and I'm glad to hear it comes with two lugs; I wanted to be sure if wasn't a single-lug bias set-up.    H^^

Damian

Offline Bill Little

  • 2017
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 12773
  • Second in COMMAND
Re: MNT Handle Dimensions
« Reply #3 on: December 13, 2010, 04:51:00 PM »
Hi Damian,

I just measured a new "100".  It measures from inside edge to inside edge (middle of the "C")...... wait for it.................... 100MM.  LL~ LL~

AFAIK, 100 is the biggest that Kaz makes.  Across my fingers at the first joint in from the tips is right at 100MM, so you can gauge from that type of measurement what size yo need.
Big Bear <><

Aberdeen, NC

James Hylton Motorsports/NASCAR/ARCA

AMA 95351 (got one of my old numbers back! ;D )

Trying to get by

Online RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13770
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: MNT Handle Dimensions
« Reply #4 on: December 13, 2010, 09:05:23 PM »
HI

Bill is correct the 80  85  90 and  100 MM handles are listed by the inside diminsion, I stock all of the and there is also the hard point handles, they are made in 85 and 90mm

Regards
Randy

Online RandySmith

  • Administrator
  • Trade Count: (0)
  • Admiral
  • *****
  • Posts: 13770
  • Welcome to the Stunt Hanger.
    • Aero Products
Re: MNT Handle Dimensions
« Reply #5 on: August 12, 2016, 05:05:39 PM »
bump for picture


Advertise Here
Tags:
 


Advertise Here