stunthanger.com

Vendors Corner => Aero Products => Topic started by: Paul Allen on December 29, 2009, 03:03:18 AM

Title: Landing gear for Vector 40 kit
Post by: Paul Allen on December 29, 2009, 03:03:18 AM

Randy
        Do you have alloy landing gear to fit the Vector 40 kit,with more ground
clearance then the one supplied in the kit.
Thanks
Paul Allen
Australia

Title: Re: Landing gear for Vector 40 kit
Post by: RandySmith on December 29, 2009, 08:55:13 AM

Quote from: paul allen on December 29, 2009, 03:03:18 AM

Randy
        Do you have alloy landing gear to fit the Vector 40 kit,with more ground
clearance then the one supplied in the kit.
Thanks
Paul Allen
Australia

Hi Paul

No I only have CF gear that is larger, I have 40 and 60 size CF gear  and  40 sized dural gears
You can use the 60 gear and it will work just fine and raise the ground clearance for you, you can also locate the axle hole in the 40 gear lower and use thin 2.25 or 2.5 inch wheels, this works well too

Regards
Randy

Title: Re: Landing gear for Vector 40 kit
Post by: John Witt on December 29, 2009, 04:53:02 PM

I made this extension for my E-Vector. I fly from a short cut grass field and it works fine. Made from aluminum strip the same width and thickness as the end of the stock gear. It's bolted on through the wheel pants hole and the original axle hole with two 4-40 screws. It doesn't even look too storky.

I love my Vector!

John W

Title: Re: Landing gear for Vector 40 kit
Post by: Paul Allen on December 30, 2009, 01:42:34 AM

OK, thanks guy's.
Paul