stunthanger.com

Vendors Corner => Aero Products => Topic started by: YakNine on January 27, 2012, 07:00:59 AM

Title: K&B 61 Tube Muffler Specs?
Post by: YakNine on January 27, 2012, 07:00:59 AM

Hey Randy, I have a Veco 61 and would like to put a muffler on it I was wondering what the bolt center dimensions are on your K&B tube muffler and if the veco has enough meat in the sides of the stack to drill it for through bolts. Thanks , T.J.

Title: Re: K&B 61 Tube Muffler Specs?
Post by: YakNine on January 27, 2012, 07:35:53 AM

Randy, I forgot to add I need a needle valve too, the case has cast bosses for a venturi approximately 19 mm. Wide od that could be milled down to 16.5 -16mm. The through hole for the needle is approx 4 mm. Do you have a Pa type needle that will fit, Ps. These measurements are as precise as I could get with a plastic ruler. T.J.

Title: Re: K&B 61 Tube Muffler Specs?
Post by: RandySmith on January 27, 2012, 01:54:21 PM

Quote from: YakNine on January 27, 2012, 07:00:59 AM

Hey Randy, I have a Veco 61 and would like to put a muffler on it I was wondering what the bolt center dimensions are on your K&B tube muffler and if the veco has enough meat in the sides of the stack to drill it for through bolts. Thanks , T.J.

Hi TJ

I would need to see your I do not have a Veco 61 here to look at and test, But I have sent tHe Enya 50 and 61 tube mufflers out to a person who used it with a strap on a Veco 61, he also used the Enya 61 NVA I sent

Randy

Title: Re: K&B 61 Tube Muffler Specs?
Post by: YakNine on January 27, 2012, 06:46:07 PM

Thanks Randy I have one engine all torn down now I can send you the case if you want to see what you think.T.J.

Title: Re: K&B 61 Tube Muffler Specs?
Post by: RandySmith on January 30, 2012, 11:48:17 AM

Quote from: YakNine on January 27, 2012, 06:46:07 PM

Thanks Randy I have one engine all torn down now I can send you the case if you want to see what you think.T.J.

Hi yes you can do that, I will see what I have that will fit

Randy