stunthanger.com
Vendors Corner => Aero Products => Topic started by: Stan Bidowski on April 03, 2010, 03:43:19 PM
-
Hi Randy, I'd like to know some more about this engine. Does the Enya 61 CXS pro Ringed Rear Ex Model come with a muffler, or is one available?
Are there headers for it available? What rise(s)? Do other engine headers fit the Enya?
Does it make a good piped engine? Would the piped Enya's performance be comparible
to a PA .61 on pipe? Would an unpiped Enya's power/run be comparible to, say, an ST 60 in unpiped mode?
The Enya website does not have a picture of the rear exhaust 61. Can you please post some?
Are the specs different then the side exhaust version- weight, timing, etc?
Does it mount in the same holes as another engine, say an ST 60, or older model Enyas? H^^
Stan Bidowski
-
Hi Randy, I'd like to know some more about this engine. Does the Enya 61 CXS pro Ringed Rear Ex Model come with a muffler, or is one available?
Are there headers for it available? What rise(s)? Do other engine headers fit the Enya?
Does it make a good piped engine? Would the piped Enya's performance be comparible
to a PA .61 on pipe? Would an unpiped Enya's power/run be comparible to, say, an ST 60 in unpiped mode?
The Enya website does not have a picture of the rear exhaust 61. Can you please post some?
Are the specs different then the side exhaust version- weight, timing, etc?
Does it mount in the same holes as another engine, say an ST 60, or older model Enyas? H^^
Stan Bidowski
Hi Stan
The new Enya 60 RE is the same basic motor as the 61 SE.
It does not come with a muffler. however Enya says they will have one soon, I have one now, I have headers 1.25 rise, and slide on cnc Aero Tube mufflers.
the motor makes Good power and works with a muffler or pipe, I would use a pipe if I were to have one in a ship, and I may put one in a SV-11 ARC very soon, The Enya has a little more Power than a good ST60
Regards
Randy
-
Hi Stan
The new Enya 60 RE is the same basic motor as the 61 SE.
It does not come with a muffler. however Enya says they will have one soon, I have one now, I have headers 1.25 rise, and slide on cnc Aero Tube mufflers.
the motor makes Good power and works with a muffler or pipe, I would use a pipe if I were to have one in a ship, and I may put one in a SV-11 ARC very soon, The Enya has a little more Power than a good ST60
Regards
Randy
Hey Randy:
"The Enya has a little more Power than a good ST60"
The Enya you were testing here was it the side exhaust with muffler, or the rear exhause with pipe ?
-
Hi
I tested and ran both of the side and rear versions
Randy
-
Randy, I'd like to hear more about these Enya's when you've had the chance
to use them in a plane, in the air. A piped rear exhaust Enya 61 in a SV-11
ARF is a couple of unknowns I'd like to know more about! This could be a
very nice combination once the correct setup is found.
Stan Bidowski