stunthanger.com
Vendors Corner => Aero Products => Topic started by: Leester on January 15, 2007, 12:05:37 PM
-
Hi Randy: On my want list is an Aero Tiger 36, are these engines a stock item or are they built upon ordering? I'm sure the factory muffler is probobly to heavy, is an Aero tube or tongue muffler better ? I was planning on putting it in the Stilleto "35" to be built from the plans I bought from you. If they are built upon ordering what is the average time to have one built ? Thanks
-
Hi Randy: On my want list is an Aero Tiger 36, are these engines a stock item or are they built upon ordering? I'm sure the factory muffler is probobly to heavy, is an Aero tube or tongue muffler better ? I was planning on putting it in the Stilleto "35" to be built from the plans I bought from you. If they are built upon ordering what is the average time to have one built ? Thanks
HI Lee,
Don't know for sure if they are "in stock". Don't know for sure how long it takes to build one. What I DO know for SURE is that you NEED one!
Get one, with one of the Aero mufflers, and use it. Run it exactly like Randy says to, and enjoy a real "intelligent" Stunt Engine! They are the very best stunt engine in the category.
Bill <><
-
Hi Randy: On my want list is an Aero Tiger 36, are these engines a stock item or are they built upon ordering? I'm sure the factory muffler is probobly to heavy, is an Aero tube or tongue muffler better ? I was planning on putting it in the Stilleto "35" to be built from the plans I bought from you. If they are built upon ordering what is the average time to have one built ? Thanks
HI Leester
I had stock and They are normally stock items however I sell out very fast over the holiday season, and this year had a very big demand for them, I plan on having the AT 36 back in stock soon, as I still have a few unfilled orders.
With most all motors tube mufflers are better, they flow better sound smoother and are normally quieter. The reason to use a tongue muffler over the tube is strictly weight. many planes can''t stand more nose weight.
My CNC tube are only about an ounce. You can judge your situation on mufflers from that.
I will try to post some of the new products here soon
and specials
Regards
Randy
-
Randy, are the AT 36's back in stock at this time?
-
Randy, are the AT 36's back in stock at this time?
Hi Dick
I will have Aero Tigers back in stock on the shelf soon, I am sending out all teh back orders now, So Next week I will have motors to ship for new order,
Also the New bottles are finally in andn I have
AERO-1 Filler in qts or pints back in stock
Aero-1 Fuel Supplement back in stock in qts and pints
All the PA engines are all now back in stock as I am shipping the back orders one now
All the cnc tube and tongue muffler are in stock
also the HZ CNC FOX 35 cranks , FOX PA NVAs , and all stock FOX parts
New Majik CF underchambered Billy Props are in stock both the 10.5 x 4 and the 13 x 4
I will try to keep everyone up on the information here and I will post pictures of products
regards
Randy
-
These are some of the tongue , tube and header muffler
New ones are for the BRODAK 25
Randy
-
Randy,
I left a message on your phone yesterday but I presume your at VSC. I wanted to order some various sizes of of NV assemblies and a couple of venturies for the VF 40 and 46. Is that a header muffler I see for the VF? I would also like to get one to play with. How do they compare to running on a pipe?
Good luck at VSC if that's where you're at and look forward to hearing from you.
Bruce (916) 257-7216