Not pleased so far! The circuit for the starter burned out, and Andy Borgogna soldered a couple of shunts to take the main power as a bypass for the starter.
Now, however, the plug circuitry has feebed out. I note that the plastic housing on top is distorted (melted), so it is clear that the heat generated is not being allowed to escape. I have another copy of the board, and have cut circulation holes for the air to flow through.
I am only running 1/2A stuff with this panel, so it is really pitiful that it should fail. Again.
I have contacted Tower Hobbies. We will see what they will do about the situation. All things considered, I would like to have a backup to the backup I am now using.