stunthanger.com

Building Tips and technical articles. => 1/2 A building. => Topic started by: Motorman on April 29, 2013, 08:55:45 AM

Title: blank
Post by: Motorman on April 29, 2013, 08:55:45 AM

blank

Title: Re: Tatone Mount for Cox TD .049
Post by: Dan Berry on April 30, 2013, 07:41:22 AM

Mount with a tank?

Title: Re: Tatone Mount for Cox TD .049
Post by: Dan Berry on May 02, 2013, 11:15:43 AM

Ah. I don't have that.
Are you familiar with backplate mounts? The are still available and weigh less.

Title: Re: Tatone Mount for Cox TD .049
Post by: Dan Berry on May 02, 2013, 05:23:04 PM

I've seen a lot of backplate mounts on FF planes and never saw one that was a problem.
A tiny drop of soft Loctite could ease concern.

Title: Re: Tatone Mount for Cox TD .049
Post by: Dan Berry on May 05, 2013, 01:42:54 PM

Hank Nysrom at Texas Timers.

should be
Texastimers dot com

He also has the fine-thread needle valves that make needling a TD easier.

Title: Re: Tatone Mount for Cox TD .049
Post by: Reptoid on May 05, 2013, 04:59:38 PM

I believe this is the only one for beam to radial for 1/2A that's still in production:

http://www3.towerhobbies.com/cgi-bin/wti0001p?&I=LXB866&P=7