stunthanger.com

Building Tips and technical articles. => 1/2 A building. => Topic started by: Jim Thomerson on March 22, 2008, 07:31:35 PM

Title: Revup type 1/2A spinners
Post by: Jim Thomerson on March 22, 2008, 07:31:35 PM

Jim Lee has some made up from Revup cones and new point, backplate, adapter nut, etc.  He has 1 inch and maybe 1 1/8 (don't recall.) Probably should tell him what engine it is for.   

Title: Re: Revup type 1/2A spinners
Post by: Bill Little on March 22, 2008, 07:43:36 PM

Hi Jim,

Mr. Lee sent me a prototype a few weeks ago.  It is awesome, and mine was made to use on a Norvel .061.  really sharp item!  They are only 1" as those are the only cones he has.

Title: Re: Revup type 1/2A spinners
Post by: minnesotamodeler on March 22, 2008, 09:52:04 PM

Who, where, how much?  PIctures??

Title: Re: Revup type 1/2A spinners
Post by: Bill Little on March 22, 2008, 11:00:14 PM

Hi Ray, I posted some pictures.  I think under Jim's section in the Vendor's Corner.  IIRC, the cost is to be $25 plus shipping.  They are spun aluminum like the old Froom.

Title: Re: Revup type 1/2A spinners
Post by: Bill Little on March 22, 2008, 11:04:51 PM

EDIT: found this:

Quote

Half A spinners
« on: November 20, 2007, 08:30:04 PM »
   Reply with quoteQuote Modify messageModify Remove messageRemove Split TopicSplit Topic
Check out the latest product in stock.
One inch diameter spinners.
Spun aluminum cone with a turned backplate from 6061- T-6 alloy.  The nose piece has a 1/16" cross hole to tighten, with a 5-40 stud to fit into the supplied union nut.  These are fit together as a set.
No prop cut outs.  The assembly weighs just under a quarter of an ounce.
Price is $20 with $2 shipping

Title: Re: Revup type 1/2A spinners
Post by: James Lee on April 08, 2008, 01:02:35 PM

I now have these with 3mm x 0.5 threds for the Norvel..   I will be doing the 4mm x 0.7 threads as soon as I can find my roun tuits....
Thanks
Jim Lee
Lee Machine Shop
PS sorry the shipping has gone to $3 for the spinners

Title: Re: Revup type 1/2A spinners
Post by: James Lee on April 28, 2008, 03:17:02 PM

Hi All
I now have the 1" spinners with 5 x40 (Cox, etc), 3mm x 0.5 (Norvel) and 4mm x 0.70 (AP Wasp)
$20 plus $3 shipping
thanks
Jim Lee
Lee Machine Shop

Title: Re: Revup type 1/2A spinners
Post by: minnesotamodeler on April 29, 2008, 01:52:10 AM

Great, good to have a source, thanks James.

Title: Re: Revup type 1/2A spinners
Post by: Dick Byron on May 20, 2008, 06:22:58 PM

I have 2 for the wasp and they are great.