Well Larry, the wing tips are different, the TE on ours goes all of the way to the end of the wing, the old one stopped about 1/2" short and blended in with a taper on the main wing tip. We make the fuselage in one piece, they had a tail block added to theirs. We use a elevator dowel rod to avoid the large hole in the rudder. Their fin wrapped around the stabilizer to form part of the fuselage tail, we made that part of the fuselage. They put a dip in the top of the fuselage under the canopy, we did not and we did not add a head rest. They cemented 4 pieces together to make the radiator we used a carved block. The last item was to move the cylinder of the engine to the down position to clean up the appearance. Our wing is 3/16" and can be airfoiled.
I also include beam mounts for that type of engine as the plane is rated for .049 to .099 engines and the plan shows a McCoy .099 as an option.
Larry