News:



  • March 29, 2024, 04:37:51 AM

Login with username, password and session length

Author Topic: Four Bullets  (Read 1019 times)

Offline Trostle

  • 22 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 3338
Four Bullets
« on: January 29, 2021, 01:29:34 AM »
There was a kit in the mid 50's for .049 engines called the Four Bullets.  It was a "racing" plane, fully cowled engine, with a hollowed balsa fuselage that could be build in four configurations  The combinations were based on upright or inverted engine, conventional tail or a "V" tail.

I think the kit came from Lincoln, Nebraska.

Does anyone have full size plans from this kit.

Keith

Offline dennis lipsett

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 1719
Re: Four Bullets
« Reply #1 on: January 29, 2021, 02:35:11 AM »
There was a kit in the mid 50's for .049 engines called the Four Bullets.  It was a "racing" plane, fully cowled engine, with a hollowed balsa fuselage that could be build in four configurations  The combinations were based on upright or inverted engine, conventional tail or a "V" tail.

I think the kit came from Lincoln, Nebraska.

Does anyone have full size plans from this kit.

Keith


I remember the adds but never saw one. Growing up in a mining community we tended to be on the tail end of everything. Scientific and Enterprise had the manopolies on 1/2A models. I liked Enterprise kits over Scientific

Offline bob whitney

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2244
Re: Four Bullets
« Reply #2 on: January 29, 2021, 11:17:25 AM »
 Keith  4 Bullets by OCCO co

i have the origanal box and most of the parts .don't see any plans .it is a very small plane,built for a Wasp .049
« Last Edit: January 29, 2021, 11:52:35 AM by bob whitney »
rad racer

Offline bob whitney

  • Trade Count: (0)
  • Admiral
  • ******
  • Posts: 2244
Re: Four Bullets
« Reply #3 on: January 29, 2021, 11:51:38 AM »
Keith   just went through my plans pile and found the 4 Bullets plans . .will put everything in a box and get it off to you by monday. only the side view is full size but the wing and stab is there for a pattern
« Last Edit: January 29, 2021, 12:44:44 PM by bob whitney »
rad racer


Advertise Here
Tags:
 


Advertise Here