stunthanger.com

Building Tips and technical articles. => 1/2 A building. => Topic started by: John Crocker on April 14, 2008, 01:17:54 PM

Title: Aluminum Spinners?
Post by: John Crocker on April 14, 2008, 01:17:54 PM

Anybody making a decent sized (1" - 1.5") spinner for the AP .061 Wasp yet?  I really like the sharp point on the Brodaks, but don't know if it will fit the threads.

http://virginiahobbysport.com/

Title: Re: Aluminum Spinners?
Post by: minnesotamodeler on April 15, 2008, 05:27:41 AM

Apparently not.

Title: Re: Aluminum Spinners?
Post by: Roger Vizioli on April 15, 2008, 06:59:31 AM

Check Lee's machine Shop in Vendors Corner.
Roger V.

Title: Re: Aluminum Spinners?
Post by: Bill Little on April 15, 2008, 07:24:01 AM

http://stunthanger.com/smf/index.php?topic=7398.0

They are really sweet!  I got a prototype that Jim made the adapter for a Norvel, so I am guessing a Wasp adapter is possible, too.  Maybe the Norvel has the same threads??

Title: Re: Aluminum Spinners?
Post by: James Lee on April 15, 2008, 07:50:21 AM

The hardware for the AP 061 is on the next to do list....    2 -3 weeks or so..... ;D     Send me an email and I will get you on the list  y1
thanks
Jim Lee

Title: Re: Aluminum Spinners?
Post by: John Crocker on April 15, 2008, 08:40:29 AM

Thanks James