Author Topic: 1/2a Lead Outs (Read 1167 times)

Motorman · « **on:** December 06, 2020, 08:47:44 PM »

blank

Mike Hazel · « **Reply #1 on:** December 06, 2020, 10:20:48 PM »

I use leftover 018 flying cable from either retired sets of lines, or trimmed excess when making up lines. That makes it free!

Robert Whitley · « **Reply #2 on:** December 06, 2020, 10:52:11 PM »

I do the same as Mike.

Even if you bought a new set it would last you almost forever and be much cheaper than buying packaged leadout sets.

For larger models I went to Cabellos and cleaned them out of .027 fishing leader spools. I can’t tell any difference to Sullivan C size leadout sets.

Oldenginerod · « **Reply #3 on:** December 07, 2020, 01:55:19 PM »

Find a good music shop who should have a range of various size guitar strings. They used to sell them individually loose. Not sure if they still do. Otherwise, if you have a buddy who plays guitar, he probably has lots of used ones floating about. They already have a brass eyelet one end.

944_Jim · « **Reply #4 on:** December 07, 2020, 02:09:16 PM »

MM,

PM your physical mailing address. I think I have a bunch of stranded stainless in an acceptable size. I have either .015 or .018.

How much do you need?

944_Jim · « **Reply #5 on:** December 08, 2020, 10:16:43 AM »

Just dropped off the envelope. You should have them soon.

Author Topic: 1/2a Lead Outs (Read 1167 times)

Motorman

1/2a Lead Outs

Mike Hazel

Re: 1/2a Lead Outs

Robert Whitley

Re: 1/2a Lead Outs

Oldenginerod

Re: 1/2a Lead Outs

944_Jim

Re: 1/2a Lead Outs

944_Jim

Re: 1/2a Lead Outs