Welcome, Guest. Please login or register. October 27, 2016, 04:41:00 PM

Login with username, password and session length

Pages: [1]   Go Down
Author Topic: Compatibility and Interchangeability  (Read 1540 times)
Clancy Arnold
Trade Count: (0)
Offline Offline

Age: 81
Location: Indianapolis, IN
Posts: 1452

I am 5 Ft. 8 In., the Taube is 7 Ft. 4 In.

« on: December 27, 2011, 07:25:42 PM »

I was asked if the U/Tronics Control Multi channel systems were matched sets?  

The answer is NO! 

The question was did the modeler have to keep a Handle with Encoder to use only with the Decoder it came with.  He did not want to have to remove the Decoder from one model to use the Handle on a second model or could he use a different Decoder with his present handle?

The design of the Encoder and Decoder make them universally compatible.  In fact you could use a 7 channel Encoder to control a 4 channel Decoder with the limitation of only having 4 useable channels.  you could also use a 4 channel Encoder to control a 7 channel Decoder again with the limitation of only having 4 useable channels.  

I think that makes them Compatible and Interchangeable.

« Last Edit: December 27, 2011, 07:55:53 PM by Clancy Arnold » Logged

Clancy Arnold
Indianapolis, IN   AMA 12560 LM-S
U/Tronics Control
U/Control with electronics added.

Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM