stunthanger.com
News:
 
 
*
Welcome, Guest. Please login or register. June 23, 2017, 09:31:05 PM


Login with username, password and session length



Pages: [1]   Go Down
  Print  
Author Topic: NEW RSM Suspended Bell Crank Mount  (Read 1423 times)
eric rule
Moderator
Trade Count: (0)
Commander
*****
Offline Offline

Posts: 236


« on: May 10, 2017, 04:13:27 PM »

Newly arrived from the machine shop. The all new RSM Bell Crank Suspended Mount. Designed to make mounting a suspended bell crank simple and quick. The mount features an 1/8" diameter steel upright with a 1/16" flat shelf. Just slide the bell crank onto the shaft and let it sit on the shelf. Then slide the small top "slider" onto the shaft and run it down until it sits on top of the bell crank. Lock the top "slider" in place with JB Weld and you are done. The mount is strong and lightweight and the two shelves hold the bell crank in the middle of your wing and eliminate any up or down wiggle. The bell crank action is silky smooth with no hitches or rough spots.

Available starting May 10th for only $5.99. Order on line at www.rsmdistribution.com by telephone at 951-678-1406


* bell crank 1.jpg (49.29 KB, 1280x721 - viewed 127 times.)

* Bell Crank Mount Details.jpg (91.65 KB, 937x357 - viewed 147 times.)
Logged



Tags:
Pages: [1]   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM