Welcome, Guest. Please login or register. June 25, 2017, 01:11:31 PM

Login with username, password and session length

Pages: [1]   Go Down
Author Topic: Beech Staggerwing Profile Scale  (Read 173 times)
pat king
Trade Count: (0)
Offline Offline

Age: 72
Location: Monee, IL
Posts: 864

« on: June 18, 2017, 08:24:35 AM »

This airplane is a Beech D-17S at 1 3/8 = 1-0. It has a 47 1/8 wingspan and 622 square inches of wing area. It is for 45 to 53 size engines. The CAD plans show all parts full size. The kit does not contain any control system hardware, a control hardware kit is available.  I will email a file of the 3 view used to design the kit to the buyer if they just ask.  The laser cut kits sell for $200.00 plus shipping for 4 pounds from zip 670449.
Staggerwing Control System
This system includes RSM 4" Carbon Fiber Bell Crank, Lead out wires, RSM Bellcrank Mount, 5 mm Carbon Fiber push rod tube, Right hand and left hand threaded push rod ends with Ball Links, #4 fender washers for the ball links, and 1/8  Elevator Horn. The fender washers are larger than the balls in the ball links, they go between the ball and the bolt head. The link cannot get past the washer even if it comes off of the ball. The Push Rod System is infinitely adjustable. Just turn the carbon fiber rod left or right to increase or decrease the push rod length.  This is a top of the line control system. This system retails for $54.99, I will sell it for $45.00 if ordered with the kit. This is the control system shown on the plans.

* BEECH STAGGERWING_SHT_1_REV_01117C.jpg (223.58 KB, 1199x776 - viewed 26 times.)

* BEECH STAGGERWING_SHT_2_REV_01117C.jpg (277.35 KB, 1297x839 - viewed 19 times.)

* BEECH STAGGERWING_SHT_3_REV_01117C.jpg (127.83 KB, 1128x730 - viewed 17 times.)

Pat King
Monee, IL

AMA 168941

Pages: [1]   Go Up
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM