Photos of Werwage Vulcan

[Chris_Rud]

Can someone post a few photos of the Vulcan? Doesn't need to be Bill's.

Thanks!
Chris Rud

[Gordon Van Tighem]

Here's one...
G

[Mike Scholtes]

Does anyone kit or short-kit the Vulcan? Is it an I-beamer? Not aware of any kit cutters offering this gorgeous model but somebody should.

[Randy Cuberly]

No one has ever kitted this Vulcan to my knowledge.  Bill W. won VCS Classic with this one several times.  Different engines at different times I think but it had an Aerotiger in it when I saw it. 

It was a great flying airplane, at least with Bill on the handle it was!

Randy Cuberly

[Chris McMillin]

Didn't Warren Tiarht draw plans for it and publish them somewhere? SN or FM? He built and flew a beautiful version some time back.
Chris...

[Air Ministry .]

Not being a smartarse,  Been sitting in front of this computer looking up things, most of the week . Whereas I couldve taken out & adjusted the Steering Box on the auto mobile .

December 2007 issue of Model Aviation, PLAN  # 1011

Is this Vulcan an I beamer?  I have two sets of plans from Warren, and one is for the I beam version.

Ty Marcucci

BOTH ACTUALLY ,  

zer liddle eengeesh , here http://www.modelbouwforum.nl/threads/variabele-spoed.220601/

[Craig Beswick]

Hi guys,
if you get a set of plans Eddie at Lazer Works will make up a parts package of all wood on the plan!
Good Luck
Craig

http://lazer-works.com/index.html

[Chris_Rud]

I'm looking for pictures since I plan to do a short kit of it. It will be a bit but its on the list.

I saw one on the VSC post but I can't find it now... Anyone have pictures of that one?

-Chris

[Chris_Rud]

I have obtained, some time back, a foam wing set for the Vulcan. I believe it was cut by Bob Hunt. You might ask....

Thanks Ty!

[NED-088]

zer liddle eengeesh , here http://www.modelbouwforum.nl/threads/variabele-spoed.220601/

This is a thread about not controlling the rpm, but the pitch of the prop. It actually works at a constant r.p.m. But the design of the plane is not in the way I would have done it.
After me asking about the forward swept hinge line, someone came up with the article about Bill W.
Both Henk and I don't feel any advantage in fwd swept hinge lines, as you could read in that thread......

[Serge_Krauss]

'sorry for the quality Chris, but my scanner is not up to the job. These are from VSC 14 (I think) in 2002.

[fred cesquim]

gee, i really NEED to paint one of my models with this scheme! gorgeous plane and painting!
maybe the ARES will sport this pattern, not sure about black, under Brazilian sun, surely will be a challenge to keep the paint from bubbling

[Elwyn Aud]

VSC's