And so it begins.. PA 75s etc..

[RandySmith]

PA 75 production  has started, I am cleaning machining , honing  and will be fittings and putting these together, it will be about 4 to 5 weeks  for these to be made , boxed, and I will be shipping  these as they were bought,  the first 25  engines are   shipping  now

If you have one on order please  contact me about confirm and  shipping will  need to be paid

Randy

[Chris_Rud]

PA 75 production  has started, I am cleaning machining , honing  and will be fittings and putting these together, it will be about 4 to 5 weeks  for these to be made , boxed, and I will be shipping  these as they were bought

Randy

I see mine! Third from the left

[Larry Fernandez]

How cool to see my new motor before it gets assembled!

Larry, Buttafucco Stunt Team

[Shug Emery]

Ooooohhhhh....now, a plane to rest it in!
Shug

[RandySmith]

more  pics  Piston Sleeves

[Motorman]

blank

[Larry Fernandez]

Ooooohhhhh....now, a plane to rest it in!
Shug

Here's where mine is going.

Larry, Buttafucco Stunt Team

[Steve Fitton]

Cool pictures Randy!

[Doug Moon]

 
 

[Howard Rush]

I see mine! Third from the left

Yours is the one he dropped on the concrete floor.

[Matt Colan]

Damn you student loans!!! 

[Jim Oliver]

Randy,
Thanks for the update:)

[proparc]

Randy, I see a couple of side exhaust motors in there. What's the story on them?

[wwwarbird]

 If someone wants to sponsor the engine program I'll build a Spruce Goose. 

[Allan Perret]

How many total in this run ?

[Don Jenkins]

Its almost Christmas!!!!!!!!

Don

[Peter Grabenstein]

Yours is the one he dropped on the concrete floor.

you must be very, GOOD OL´FRIENDS....
Very Kind words ....that's........ why I very like this Forum.

Awesome work...Randy....thanks for pics. .

[Chris Cox]

Very cool Randy.  Great job!

[RandySmith]

Does Henry do the piston fit?


MM

NO  but he did chrome the sleeves

[RandySmith]

Randy, I see a couple of side exhaust motors in there. What's the story on them?

40s  51s  61s   mostly pre-sold motors

Randy

[RandySmith]

How many total in this run ?

this run was more than 100

Randy

[Allan Perret]

Hey Randy, working on any new sources for carbon props for these ?

[Doug Moisuk]

Hey Randy, working on any new sources for carbon props for these ?

I just got a couple from him. He probably has more. Give him a call.

[RandySmith]

Hey Randy, working on any new sources for carbon props for these ?

yes  they are  in stock

Randy

[RandySmith]

First batch being  shipped , this is after  assembly .....
shown below  most of the 38  parts to make a  75


Randy

[Shug Emery]

Hey Randy....excited to get my .75.
What size prop do you recommend for the .75 in two blade and 3 blade?
And also what muffler?
Thankee.
Shug

[Allan Perret]

First batch being  shipped , this is after  assembly .....
shown below  most of the 38  parts to make a  75
Randy

Cases really look nice. Cant wait to get it.
So what are the 2 brass colored parts just below the needle ?
Is the porting/timing on this batch same as earlier 75's ?

[RandySmith]

Hey Randy....excited to get my .75.
What size prop do you recommend for the .75 in two blade and 3 blade?
And also what muffler?
Thankee.
Shug

HI  the  best prop  13.5 x 4.5  3 blade  cf ,  the 2 blade size  ranges from wide blade 14 x 4.5   to  15 x 4.8  although  not many can stand the  diameter  of the  2 blades,  Ships like Al Rabe   Bearcat  and other  have ran the  15 x 4,8

Randy

[RandySmith]

Cases really look nice. Cant wait to get it.
So what are the 2 brass colored parts just below the needle ?
Is the porting/timing on this batch same as earlier 75's ?

There are  3 option for the  Needle assembly, the other  2 are shown below,  hi flow needle  with fuel pickup and needle on same side, ( wonderful for side ex motors )  and the remote needle
This batch is  exactly the  same  as the  last  PA 75s , no need to change anything


If  you owe  S&H   please contact me  as most  all  will  have to  have shipping added

Randy

[RandySmith]

Hey Randy....excited to get my .75.
What size prop do you recommend for the .75 in two blade and 3 blade?
And also what muffler?
Thankee.
Shug

Although the  3 blade  carbons are  best, in my opinion ,  I  have used  These  on the 75
J Zinger wood  15 x 5  depitched slightly
Jo Z  woo 14 x 5 PRO series  depitched slightly  ( cut in opposite Phillips entry)
If you can find the  a  16 x 4.5  REV UP  cut to  14   14.5 or 15   works very well too
Not sure about other brand wood props, but no reason the wouldn't work

Randy

[Allan Perret]

There are  3 option for the  Needle assembly, the other  2 are shown below,  hi flow needle  with fuel pickup and needle on same side, ( wonderful for side ex motors )  and the remote needle
This batch is  exactly the  same  as the  last  PA 75s , no need to change anything


If  you owe  S&H   please contact me  as most  all  will  have to  have shipping added

Randy

I'm liking that remote needle option, especially with the right angle inlet.. Does that come with motor or is it extra ?   

[Doug Moisuk]

I'm liking that remote needle option, especially with the right angle inlet.. Does that come with motor or is it extra ?   

How do you mount the remote needle and how does the fuel get to the Venture. What am I not understating?

[RandySmith]

I'm liking that remote needle option, especially with the right angle inlet.. Does that come with motor or is it extra ?   

NO  it does not  come with the engine, the  Standard  Spray bar  arrangement  does,  I really do not  recommend  the remote NVA,  although  the  same  side  one  does  work very well on the  PA engines
Any of the  3  is availble  s, and sold  separate

Randy

[RandySmith]

How do you mount the remote needle and how does the fuel get to the Venture. What am I not understating?

Remote mount  , NVA mounts to the  fuse sides   bulk head  or  engine backplate , then a short piece of tubing to the  spraybar,  I don;t recommend them  if you want any cycling in the engine, it seems to slow it down and makes the needle setting  very coarse

Randy

[Ted Fancher]

Here's where mine is going.

Larry, Buttafucco Stunt Team

Where do the batteries go, Larry?

[Allan Perret]

NO  it does not  come with the engine, the  Standard  Spray bar  arrangement  does,  I really do not  recommend  the remote NVA,  although  the  same  side  one  does  work very well on the  PA engines
Any of the  3  is availble  s, and sold  separate

Randy

The "Same Side" option, looks like it also has the elbow fuel inlet, is that right ?

[BYU]

Here's where mine is going.

Larry, Buttafucco Stunt Team

You really need to stop taking pictures of models built by other flyers and then claiming them as your own.
Those wings don't have monocote on them, so they can't be yours.

[Randy Cuberly]

Uhhhhhhhhh...Might as well give it up Larry.  You can't win!

 

Randy Cuberly

[Larry Fernandez]

Where do the batteries go, Larry?

I'm afraid I just don't know how to reply to this.

(And I keep telling people what a nice guy you are.)

Larry, Buttafucco Stunt Team

[Gerald Arana]

I'm afraid I just don't know how to reply to this.

(And I keep telling people what a nice guy you are.)

Larry, Buttafucco Stunt Team

Let me help you out Larry. The battery goes on that thingy that sticks out of the head of the engine........ 

Jerry

[Larry Fernandez]

You really need to stop taking pictures of models built by other flyers and then claiming them as your own.
Those wings don't have monocote on them, so they can't be yours.

Keep it up wise guy
your time is comming

Larry, Buttafucco Stunt Team

[Trostle]

The battery goes on that thingy that sticks out of the head of the engine.
Jerry

I thought that thingy is called a thingababog.

But I have been wrong before about this stuff.

Keith

[Doug Moisuk]

Dohicky

[RandySmith]

First and second batch  of  25 is  now all shipped,  3rd  batch  is shipping  now and  4th is in progress to be in shipping soon,  the final 5th batch will be  shipping very  soon .
There will be  an over run batch made up later when I receive the  parts

Randy

[RandySmith]

Photo  people have asked for on  mufflers   , shown  K-77 with  77 - 75  muffler,  PA  51  with  40 - 61 muffler aluminum  and  PA 75 engine

Randy

[Chris Wilson]

Metallic porn!

Wonderful work Randy.