Enya venturi inserts

[Bill Morell]

Recently I had some of these done Lee's Machine shop. These are not conventional venturis but rather the type that fit down inside the case. They were absolutely perfect! They are hard to come by and really about the only chance you have of getting these is to have someone that knows what they are doing make them. I highly reccomend Lees Machine shop if you need something like these made for you.

[dennis lipsett]

Recently I had some of these done Lee's Machine shop. These are not conventional venturis but rather the type that fit down inside the case. They were absolutely perfect! They are hard to come by and really about the only chance you have of getting these is to have someone that knows what they are doing make them. I highly recomend Lees Machine shop if you need something like these made for you.

Bill,
Your not saying which venturis you had made. Randy Smith has factory  venturis for most all of the Enya lineup. Now if he made them for the square venturis found on the 5224 that would really be something.
Dennis

[Bill Morell]

Dennis, he made inserts for the Enya 63 and the 35 6001 and therefore are indeed really something. There really isn't much point in having someone make the square venturi's when they are readily available direct from Enya. Try buying these that I had made from Enya sometime.

[James Lee]

A picture of what Bill is talking about.   The inserts are symmetrical, with an inside taper on each end.   And the slit accommodates variations in the id of the venturi.  They have to be pushed firmly into place.    Bill provided originals to copy, and after he sent them, I found an old Enya of a different size to better understand how they fit.
Interesting project...
Jim

[dennis lipsett]

A picture of what Bill is talking about.   The inserts are symmetrical, with an inside taper on each end.   And the slit accommodates variations in the id of the venturi.  They have to be pushed firmly into place.    Bill provided originals to copy, and after he sent them, I found an old Enya of a different size to better understand how they fit.
Interesting project...
Jim

Thanks,
I forgot about those,
dennis

[Garf]

Very similar to the K&B Greenhead.

[Tags:]

Jump to: Please select a destination: ----------------------------- Announcements ----------------------------- => Stunt Hangar Admin announcements ----------------------------- General control line discussion ----------------------------- => Open Forum => CAD USERS => The Suggestion Box ----------------------------- Find One Teach One ----------------------------- => FOTO op Members in your area that are willing to teach control line. ----------------------------- Engine basics ----------------------------- => Four strokes only ----------------------------- Design ----------------------------- => Engineering board ----------------------------- Nostalgia 30 ----------------------------- => Nostalgia 30 ----------------------------- Vendors Corner ----------------------------- => Action Hobbies/Lazer Works => Al Rabe models => Aero Products => builtrightflyright.com => Northcoast Hobby => BJM Enterprises => CFC Graphics => Control Line Central => Control Line World => Core House => Cox International => Eliminator Props => Frank Bowman Rings => JD's Foam Wings => LEE MACHINE SHOP => Minnesotamodeler => PDK LLC Laser Cut Kits => Progressive RC => RSM => Sammy's Model Design => S&S Hobby => U/Tronics Control => Ultra Hobby Products => Wings On Strings ----------------------------- In Memory of ----------------------------- => our friends will be missed ----------------------------- Local Clubs ----------------------------- => Post your club info here