stunthanger.com
News:
   
 
 
*
Welcome, Guest. Please login or register. December 20, 2014, 09:31:11 AM


Login with username, password and session length



Pages: [1]   Go Down
  Print  
Author Topic: Single channel use  (Read 1709 times)
Vincent Corwell
Trade Count: (0)
Commander
****
Offline Offline

Age: 73
Posts: 293


« on: May 18, 2007, 04:19:40 AM »

Can you show a complete set up please for
a single channel, say for throttle control

servo , battery , controller unit
 at the handle end , battery? controller

Is it viable to use only one insulated line and one standard line?

Is there a link to your web site please ?

Thank you

Vincent
Logged

Clancy Arnold
Moderator
Trade Count: (0)
Admiral
*****
Offline Offline

Age: 79
Location: Indianapolis, IN
Posts: 1418


I am 5 Ft. 8 In., the Taube is 7 Ft. 4 In.


« Reply #1 on: May 19, 2007, 09:25:24 AM »

Vincent
Check your Email.  I sent you a copy of the Single Channel U/Tronics Instruction sheet.  Hope that answers your questions. 

The use of one insulated and one uninsulated line would work, but I would worry about the different air drag because of the different outside diameters.

Clancy


* Single_channel _instructions.jpg (97.75 KB, 1104x1312 - viewed 310 times.)
Logged

Clancy Arnold
Indianapolis, IN   AMA 12560 LM-S
U/Tronics Control
U/Control with electronics added.
Clancy Arnold
Moderator
Trade Count: (0)
Admiral
*****
Offline Offline

Age: 79
Location: Indianapolis, IN
Posts: 1418


I am 5 Ft. 8 In., the Taube is 7 Ft. 4 In.


« Reply #2 on: May 15, 2011, 03:42:08 PM »

Please note that the street address on the above drawing has changed.

Clancy Arnold
7174 Eagle Cove S. Dr.
Indianapolis, IN 46254
Logged

Clancy Arnold
Indianapolis, IN   AMA 12560 LM-S
U/Tronics Control
U/Control with electronics added.
Tim Wescott
Server Supporter
Trade Count: (0)
Admiral
*
Offline Offline

Age: 52
Location: Right here! (is this a trick question?)
Posts: 6107


« Reply #3 on: May 15, 2011, 04:08:12 PM »

The use of one insulated and one uninsulated line would work, but I would worry about the different air drag because of the different outside diameters.
I recall a post here from someone who had just that problem -- one thin line and one thick line, and an elevator that responded in a consistent (and unfortunate!) manner to changes in line tension.
Logged

AMA 64232
John Rist
Trade Count: (0)
Admiral
******
Offline Offline

Age: 74
Posts: 1347



« Reply #4 on: May 31, 2011, 01:51:57 AM »

DO NOT USE ONE INSULATED LINE - unless perhaps you are coating your own lines with polyurethane. Even in that case I would coat both.  See post

http://stunthanger.com/smf/index.php?topic=18806.0

I lost my Eindecker due to one insulated line.  When I slowed down and line tension got low the drag on the insulated up line drove the Eindecker up and over the top - BIG SPLAT!


* crash.JPG (137.84 KB, 480x319 - viewed 109 times.)
Logged

John Rist
AMA 56277

Tags:
Pages: [1]   Go Up
  Print  
 
Jump to:  


Powered by MySQL Powered by PHP Powered by SMF 1.1.20 | SMF © 2013, Simple Machines

Valid XHTML 1.0! Valid CSS! Dilber MC Theme by HarzeM