News:



  • March 28, 2024, 12:23:02 PM

Login with username, password and session length

Author Topic: baby crop duster from southridge CNC models  (Read 11193 times)

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
baby crop duster from southridge CNC models
« on: March 29, 2015, 06:04:50 PM »
Good day ladies and gents!
For those who don't know me... probably most of you.... Lol I am Dane Martin from the las Vegas circle burners. I'm big time into building reed powered 1/2A models. Maybe best known that mine always run perfectly!! Haha, anyhow, this is the southridge CNC models baby cropduster. Not a model you see everyday. So i had to have it. Before getting started , i read the instructions. Of course i could build this plane with out it, but i was interested in the kit in its entirety. Absolutely a delight! Well written, great instructions. I followed them to the letter. The kit is unbelievably high quality. I had to tell myself this is cnc cut, not laser cut several times! I'll do the build in a couple reply type posts to keep it short. Thanks for reading
Dane

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #1 on: March 29, 2015, 06:15:14 PM »
My kit came with a personalized message, a nice touch and keeps the idea that this is a guy just like us. Someone who loves control line.
The kit packaging was a very nice with attention to detail.
I followed the instructions, and was pleased. I can recommended this kit for a first time builder after this build. Experienced fellows will appreciate the fit and quality!
The wing went together so fast, i didn't realize i was totally done! To line up the ribs, spar, and LE took 17min. Literally had this wing done and ready to sand in just over a leisurely hour. It's remarkably straight and light weight.
Home run Greg! In addition to SH, I'll be posting this on other forums and our club newsletter.

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #2 on: March 29, 2015, 06:17:38 PM »
Wing construction pics...

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #3 on: March 29, 2015, 06:20:33 PM »
Wing shown with included wing jig blocks. Rubber bands mentioned in instructions are also included! Easy straight build.
All this was done with the aid of my trusty assistant and plane trim designer, Daviny!

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #4 on: March 29, 2015, 06:21:58 PM »
Last of the wing pics. Came out straight and satisfactory!

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #5 on: March 29, 2015, 08:07:42 PM »
Nearly final construction pics. Now just needs some final sanding around the wing fillets and what not. Really cool motor mount appearance. I could monokote or Lustrekote this monster and fly tomorrow.. Oh wait. I gotta work. Ok, I'll do a good paint job then.. Lol

Jim Roselle

  • Guest
  • Trade Count: (0)
Re: baby crop duster from southridge CNC models
« Reply #6 on: March 29, 2015, 10:52:41 PM »
Dane,

That's a really cool kit, where can it be purchased?

Jim

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #7 on: March 29, 2015, 11:18:54 PM »

Online Dalton Hammett

  • 21 supporter
  • Trade Count: (0)
  • Captain
  • *
  • Posts: 557
Re: baby crop duster from southridge CNC models
« Reply #8 on: March 30, 2015, 05:13:54 AM »
You are correct,   Greg's kits are excellent,  wait till you see the 48" Crop Duster profile.
Dalton Hammett  
Albion, Pa.
Bean Hill Flyers
AMA  29918

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #9 on: March 31, 2015, 01:16:40 PM »
I guess that means I'll be building a four stroke powered 48" cropduster soon...  #^

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #10 on: April 05, 2015, 08:22:50 PM »
The bulk of the sanding is done. Very smooth and ready for primer. Then a lot more sanding. I really was gonna Monokote it or that iron on synthetic tissue, but the kids really wanted it to look like dusty. So, lots of sanding and painting!

Offline bob jablonski

  • Trade Count: (0)
  • Lieutenant
  • ***
  • Posts: 110
Re: baby crop duster from southridge CNC models
« Reply #11 on: April 09, 2015, 04:04:41 AM »
Sweet looking plane. Not the typical airplane you see every day.
Mr. Bob
Countyline Hobbies
Grovertown, IN.
574-540-1123
countylinehobbies@yahoo.com
www.countylinehobbies.com

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #12 on: April 09, 2015, 02:21:42 PM »
Thanks!
Here's the white almost complete

Offline Dane Martin

  • 21 supporter
  • Trade Count: (0)
  • Admiral
  • *
  • Posts: 2804
  • heli pilot BHOR
Re: baby crop duster from southridge CNC models
« Reply #13 on: April 13, 2015, 04:06:16 PM »
Here's some side shots of the orange on. Black trim and eyes / mouth next


Advertise Here
Tags:
 


Advertise Here