Barnstormer wing plan

[Bootlegger]

 Guy's I am looking for a set of B/stormer wing plans. Has anybody got a set that they can copy, and how much?

              Thanks

[bob whitney]

 

  there is a complete set of plans on EBAY

[Garf]

Trixter Barnstormer

http://www.ebay.com/itm/Vintage-BARNSTORMER-Old-Time-UC-Stunt-Model-Airplane-PLANS-All-Parts-Patterns-/221725207613?pt=LH_DefaultDomain_0&hash=item339fda2c3d

[Andrew Hathaway]

I would have to imagine Brodak probably has the plans for their kit.  The AMA plans service has them available too.  Assuming you're an AMA member you can go in the Model Aviation online archive and find the article on the Barnstormer.  The AMA plan is a little off, like the stabilizer and elevator being labeled backwards, but they're workable.

[Dennis Toth]

You can get a complete laser cut rib set from Brodak about $12. You can call them to place the order and get them to ship it regular ground shipping instead of the overnight (saves about $8).

SKU CLB-80RS

Best,    DennisT

[Crist Rigotti]

Download for free a complete set of plans here:

http://www.outerzone.co.uk/plan_details.asp?ID=3658

[Gary Mondry]

Gil,

Check your e-mail.

Gary

[Andrew Hathaway]

Download for free a complete set of plans here:

http://www.outerzone.co.uk/plan_details.asp?ID=3658

Those are the AMA plans...  Check out the Stabilizer with the horn bolted to it.  LOL

[Crist Rigotti]

Those are the AMA plans...  Check out the Stabilizer with the horn bolted to it.  LOL

I don't get it?

[Andrew Hathaway]

I don't get it?

How about now?

[Crist Rigotti]

How about now?

I still don't get it.  What was so funny that you LOL!

[Andrew Hathaway]

Just that the "ELEV. HORN" is bolted to the part that is labeled "STABILIZER".  I'm not sure why the "elevator" apparently has a cut-out in the middle either.  I want to say there are some other head scratchers on that plan sheet, but it's been a few years since I looked at it. 

[Crist Rigotti]

Just that the "ELEV. HORN" is bolted to the part that is labeled "STABILIZER".  I'm not sure why the "elevator" apparently has a cut-out in the middle either.  I want to say there are some other head scratchers on that plan sheet, but it's been a few years since I looked at it. 

OK.  Now I see what you mean!  It is funny!

[Gary Mondry]

On the Guillow's plan the H-stab/elevator is depicted in-place with the fuselage top block hiding the center of the H-stab.  When the FM plans were drawn that subtlety wasn't picked up and the apparent cutout was the result.